Dobinsons 2" to 3" IMS Lift Kit for Toyota Tundra (2022+)

Overview

Configure a Dobinsons IMS suspension kit for your 2022–2026 Toyota Tundra. Front spring choices provide approximately 2–3 inches of lift; rear spring choices provide approximately 1–2 inches, depending on load.

Included parts

Two IMS59-60446 front struts, two front coil springs, two rear IMS shocks, and two rear coil springs.

Features

• Rebuildable and revalvable nitrogen-gas monotube shocks.
• Vehicle-specific damping for improved suspension control.
• Corrosion-resistant shock finish.
• NOK seals and FUCHS shock absorber oil.
• Australian-made front coil springs.

Fitment and installation notes

Select springs for the constant load carried by the vehicle. Actual lift depends on the selected parts, installed equipment, and load. Some spring choices provide less lift than the range in the product title.

• TRD Pro models yield approximately 0.5 inch less lift.
• At 2.5 inches or more of front lift, a differential-drop kit or longer TRD CV axles is required. Front bump-stop extensions of at least 14 mm are also required. Failure to install these parts can cause original CV-axle failure.
• Applicable TRD axle shafts are PT362-3432B and PT362-3431B. BS59-560 can provide the required front bump-stop extension.
• Set the standard front coil seat at 175 mm (6.87 inches) from the strut bushing eye.
• IMS59-60885 and IMS59-60685 long-travel rear shocks require 2-inch rear bump-stop extensions and extended rear brake lines.
• The offered DBRTOY5 purchase option requires no rear airbags and at least 3 inches of actual rear lift under load.

Optional accessories, new top mounts, and professional assembly have additional charges unless included in the selected package.