Dobinsons 1.75" to 3.0" IMS Lift Kit for Toyota Tacoma with Quick Ride Rear (2005-2023)
Overview
Configure a Dobinsons IMS suspension kit for your 2005–2023 Toyota Tacoma with Quick Ride Rear. This setup retains the existing rear leaf springs and uses lift blocks. Select front coils for the constant front load; the rear setup is intended for standard rear load.
Included parts
Two IMS59-50220 front struts, two front coil springs, two rear IMS shocks, and either QR59-552K 1.25-inch rear blocks or QR59-551K 2-inch rear blocks with U-bolts.
Features
- Rebuildable and revalvable nitrogen-gas monotube shocks.
- Vehicle-specific damping for improved suspension control.
- Corrosion-resistant shock finish.
- NOK seals and FUCHS shock absorber oil.
- Australian-made front coil springs.
Fitment and installation notes
Select springs for the constant load carried by the vehicle. Actual lift depends on the selected parts, installed equipment, and load. Some spring choices provide less lift than the range in the product title.
- Rear lift depends on the selected blocks and the condition and load of the existing leaf springs. Blocks do not increase the leaf springs’ load capacity.
- IMS59-50941 long-travel rear shocks require extended rear brake lines and bump stops that provide a 3-inch extension over the original stops.
- This listing requires confirmation that compatible rear bump stops are already installed; no bump-stop purchase is included.
- Full replacement rear leaf springs are available separately for a later change.
Optional accessories, new top mounts, and professional assembly have additional charges unless included in the selected package.
Front coil spring specifications
- C59-302 - (40mm-1.6") Stock front end
- C59-314 - (50mm-2.0") Stock front end
- C59-352 - (50mm-2.0") Heavy load front end (110-240lbs) / (60mm-2.4") Stock front end
- C59-354 - (60mm-2.4") Heavy load front end (110-240lbs) / (70mm-2.75") Stock front end
- C59-318 - (75mm-3.0") Heavy load front end (110-240lbs)
Installation instructions