Bilstein 5100 Lift Kit with SPC UCAs (Up to 3.5") | 1996-2002 4Runner

Bilstein 5100 struts and shocks paired with American Spring Company (ASC) lift coils. The coils make the lift, so the front 5100 circlip stays on the lowest perch. You keep full up-travel and down-travel, and you get a better ride than a stock coil with added preload.

This kit includes SPC adjustable upper control arms. They restore factory alignment specs after the lift and allow more droop travel than the stock arms.

What's in the box

• (2) Bilstein 5100 adjustable front struts
• (2) Bilstein 5100 rear shocks
• (2) ASC front coil springs (your choice below)
• (2) ASC rear coil springs (your choice below)
• (2) SPC adjustable upper control arms
• Assembly included

Front lift options

• 1.5" lift [ASC 4121]
• 2.5-3" lift [ASC 4131]
• 2.5-3" lift, 100+ lbs added front weight [ASC 4132]

Rear lift options

• 1.5" lift [ASC 4221]
• 2.5-3" lift [ASC 4231]
• 2.5-3" lift, 200+ lbs added rear weight [ASC 4232]
• 3.5" lift, 300+ lbs added rear weight [ASC 4243]

Recommended add-ons

• Extended brake lines and bump stops: keep slack at full droop and protect the shocks.

Install time

• About 6 hours with upper control arms

Please note

• Lift heights are averages. Final ride height depends on your vehicle, its load, and the condition of its suspension.
• Lift heights assume the front circlip is on the lowest perch. Do not raise the perch with lift coils installed. This can damage the strut and voids the manufacturer warranty.
  
• 2WD lift heights can differ because the front end is lighter.
• ASC or OME coils are used, depending on availability.