Bilstein 5100 Lift Kit with SPC UCAs (Up to 3") | 2010-2024 4Runner & 2010-2014 FJ Cruiser

Bilstein 5100 struts and shocks paired with American Spring Company (ASC) lift coils. The coils make the lift, so the front 5100 circlip stays on the lowest perch. You keep full up-travel and down-travel, and you get a better ride than a stock coil with added preload.

This kit includes SPC adjustable upper control arms. They restore factory alignment specs after the lift and allow more droop travel than the stock arms.

What's in the box

• (2) Bilstein 5100 adjustable front struts
• (2) Bilstein 5100 rear shocks
• (2) ASC front coil springs (your choice below)
• (2) ASC rear coil springs (your choice below)
• (2) SPC adjustable upper control arms
• Assembly included

Front lift options

• 1.5" lift [ASC 5121]
• 2.5" lift at stock weight, 2" with added weight [ASC 5131]
• 2.5" lift with 200+ lbs added front weight[ASC 3121]

Rear lift options

• 2" lift [ASC 5211]
• 2.5-3" lift, 100-300 lbs added rear weight [ASC 5231]
• 3" lift at stock weight, 2-2.5" with 400 lbs [ASC 5232]
• 2.5-3" lift, 440-880 lbs added rear weight [ASC 5233]

Recommended add-ons

• Front diff drop kit: corrects 4WD CV angles. Not required, but recommended.
• Panhard correction kit: re-centers the rear axle after the lift.

Install time

• About 6 hours with upper control arms

Please note

• Lift heights are averages. Final ride height depends on your vehicle, its load, and the condition of its suspension.
• Lift heights assume the front circlip is on the lowest perch. Do not raise the perch with lift coils installed. This can damage the strut and voids the manufacturer warranty.
  
• 4Runner: does not fit 2WD models. FJ Cruiser: 2WD lift heights can differ because the front end is lighter.
• ASC or OME coils are used, depending on availability.