1998-2007 100 Series Land Cruiser Panhard Correction Kit (PCK)®

The Original PCK®. Lift a 100 Series Land Cruiser and the Panhard bar ends up pulling the axle off-center. This EimKeith weld-on bracket kit corrects the Panhard bar angle on 2–4.5" of lift — returning the bar to horizontal per the original design and eliminating the need for an aftermarket adjustable Panhard bar to recenter the axle. In most cases (up to 4" of lift) it raises the roll center for improved handling; a 4–4.5" lift maintains the roll center of an adjustable Panhard.

Because of the 100 Series’ tight overhead clearance between frame and axle, this kit uses a two-piece solution: the first 2" (50.8mm) of correction comes from the axle-side bracket, with up to an additional 40mm available at the frame side if needed.

Includes:

• (1) Frame Side Drop Bracket
• (1) Axle Side Lift Bracket
• (1) EimKeith Logo Decal

Welding required. Designed and built by EimKeith.