DuroBumps Rear Bump Stops [DBRTOY3] - OEM Height: 22+ Tundra, 23+ Sequoia, LC300, LX600 (Non-Airbag) | 1-Inch Extended: 25+ 4Runner, 24+ Tacoma, LC250, GX550

Factory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBRTOY3 replaces the rear bump stops on the newest Toyota and Lexus platforms with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.

At 3" tall (2" x 2.75" x 3" each, 44 oz per set), the DBRTOY3 runs OEM height on the 22+ Tundra (non-airbag), 23+ Sequoia, Land Cruiser 300, LX600, and 24+ Tacoma with rear leaf pack — and 1" extended on the 25+ 4Runner, 24+ Tacoma with 4-link rear, Land Cruiser 250, and GX550. Deflection: 0.75" at 1,500 lbs. Need a different height? DBRTOY2 is OEM for the 4-link group; DBRTOY4 adds an inch across the board.

• Dual-durometer rubber — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall
• Mounts in the OEM location — bolts in with no modifications
• Extends suspension life — absorbs bottom-out loads that would otherwise hammer your shocks and mounts
• Proudly made in the USA