2005-2015 2nd Gen Tacoma DuroBumps Rear Bump Stops (3.5 inch Tall) [DBR35TU]

Factory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBR35TU replaces the rear bump stops on the 2005–2015 2nd Gen Tacoma with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.

The 3.5" height is the pick for stock-height trucks and mild lifts up to 2" (fully loaded) — it will not limit wheel up-travel. Running 2"+ of lift? Step up to the 4.25" DBR425TU. Installs under the U-bolts in the same location as the OEM stops.

• Dual-durometer rubber — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall
• Mounts in the OEM location — bolts in with no modifications
• Extends suspension life — absorbs bottom-out loads that would otherwise hammer your shocks and mounts
• Proudly made in the USA
• No loss of up-travel — slightly taller than OEM, so it cushions before the ultimate stop without limiting wheel travel