🎉 🎄 Cyber Monday is Here! Up to 50% off Select Items🎄 🎉 Dismiss
No products in the cart.
This 1560mm/61.4″ long 3/4 size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota 4Runner (5th Gen). It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller prep table or 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
1 x FATF002 – Toyota 4runner (2009-Current) Foot Rails – by Front Runner 1 x RRSTD08 – Slimline II Tray – 1255mm(W) X 1560mm(L) – by Front Runner
Black epoxy powder-coated T6 aluminium 3CR12 Stainless Steel
Approximate Installed Weight 27kg (59lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2″) to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2″) to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2″) to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Width 450mm (18″) Length 1615mm (64″) Height 140mm (6″)
Weight 31.2kg (68.6lbs)
There are no reviews yet.
Your review *
Prinsu 5th Gen 4Runner Roof Rack – 3/4 (2010+)
Prinsu Roof Rack Noise Reducing Edge Trim
5th Gen 4Runner
5TH GEN 4RUNNER (10-22) HALF ROOF RACK | THE NEEDLE | SHERPA
Load Panel – Single
Prinsu | 5th Gen 4Runner Non-Drill Roof Rack – Full (2010+)
Load Panel – Double
Prinsu Quick Release Awning Mount Brackets
Username or email address *
Remember me Log in
Lost your password?
Email address *
Sales Representative ID (optional)