fbpx

Bilstein | OME Stage 2 RTR Lift Kit – 5th Gen 4Runner | FJ Cruiser (10-14)

$1,685.95

Unlike most Bilstein 5100s online, the YotaMafia kit comes pre-assembled, is torqued to spec, and is ready to bolt in upon arrival.

Let our Ready To Roll Bilstein / OME lift kit take you on your next adventure.

With years of experience and extensive product testing, we have pieced together the best bang for your buck suspension kit. This kit is more then a lift, it will change your 4Runner’s ride quality from brake diving and body roll to a comfortable firmer ride using quality suspension components sourced using Bilstein 5100’s and ARB Old Man Emu coils. Pairing these parts together allows you to use a Bilstein 5100 and keep the cir-clip on the bottom so we get full up travel and down travel on the front shocks. This is an improved way of lifting your 4Runner as opposed to just using the 5100s and pre-loading a stock coil.

This kit also utilizes SPC upper Control arms for improved handling, slightly more down travel and a much better true alignment opposed to what your factory upper control arms can provide when lifted.

Install time is 6 hours with upper control arms.

Current lead time: 2-3 Weeks

Select Front Coil Configuration * 

LD – Light duty coils, intended to be used under stock vehicle weight.
MD – Medium duty coils, intended to be used under stock weight to gain 2.5″ of lift or under medium weight (70-100lbs) to gain 2″ of lift.
HD – Heavy duty coils, intended to be used under heavy weight (100lbs+) to gain 2.5″ of lift.

LD – Light duty coils, intended to be used under stock vehicle weight.
MD – Medium duty coils, intended to be used under stock weight to gain 2.5″ of lift or under medium weight (100-300lbs) to gain 2″ of lift.
HD – Heavy duty coils, intended to be used under heavy weight (300lbs+) to gain 2.5″ of lift.

Use these 5mm trim spacers to correct drivers side lean or use one on each side to gain an additional half inch of lift.
Laser Cut aluminum and powder coated black for Corrosion resistance .

100% USA made, uses stainless steel fittings, DOT coated, uses stainless steel braided hose, 3000 PSI tested, 17” long

DuroBumps are custom-fitted and built with the durable performance of dual durometer rubber to provide a smoother progressive dampening. Reduce hard bottom outs and gain better off road control and comfort vs harsh-on-contact OEM bump stops.

Want a discount? Become a member by purchasing YM MEMBERSHIP!

Get 15% Off Your First Apparel Order!

Get a one-time coupon code for 15% off your first apparel order. Just add your email below!
Email address
X
X