No products in the cart.
If you are looking for a larger increase in travel over factory replacement lifts, this is the long travel setup needed to do so. The Total Chaos +2″ system provides everything you need, except for shocks and extended axle shafts. This kit is a great option for those looking to increase travel on the trail, or to race in limited width classes.
Designed for use with TC +2″ long travel systems.
4340 heat treated 2″ extended axle shafts and clamps are included.
Re-uses factory Toyota inner and outer CV joints and boots.
Select an option...
No added plus 2 axles
Yes add plus 2 axles (to reuse with factory CV JOINTS) (+$698.94)
These are King’s 2.5″ remote reservoir front coilovers for the Total Chaos +2″ Toyota long travel systems.
Select an option...
Yes Add King Shocks (+$1,519.00)
The +2” Total Chaos Long Travel Kit comes with everything you need in order to run long travel shocks (not included) on your 5th Generation 4Runner. Whether you need more travel on those tighter trails, or don’t want a super wide aggressive stance, this is the kit you should consider buying.
This is a race legal kit that allows admission to specific tracks with width limitations.
The 4130 Chromoly upper and lower control arms are extended 2” each and bolt to factory mounting locations. There is no need to cut or weld new mounting locations. The ball joints on the upper and lower control arms are also upgraded to 1” uniballs. These allow for more movement which provides better handling and alignment specs.
Lower control arms are fully boxed to handle anything you throw at them, but also include a secondary mount for shocks and bypasses depending on your setup.
This kit is made to work with 2.5” specific long travel coilover shocks. This kit will not work with extended travel shocks as they are not long enough.
Adjustable straps are included in this kit to help prevent excessive droop that can cause damage to shocks. These can be set to multiple settings depending on your setup.
Extended DOT brake lines are also included to be able to handle the new amount of travel allowed.
In order to retain 4WD, TC 4340 extended axle shafts must be used in this kit. These are not included, but can be added on.
Like all of Total Chaos products, the Long Travel Kit is two-staged powder coated to ensure a quality finish as well as to prevent corrosion. All of Total Chaos products are produced here in the United States.
Fiberglass fenders are required with this kit if running larger than 275/70/17 tires.
There are no reviews yet.
Your review *
Bilstein | OME RTR Lift Kit – 1st Gen Tundra
Bilstein 6112 Coilover | 2nd Gen Tundra
Bilstein | OME RTR Lift Kit – Lexus GX470
ARB OME BP-51 Lift Kit for 2nd Gen & 3rd Gen (2005+) Tacoma
Eibach Pro Lift Kit 5th Gen 4Runner (2010+)
5th Gen 4Runner Rear DuroBumps Bump Stops (5.25″) (2010+)
Bilstein | OME Stage 2 RTR Lift Kit – Lexus GX460
Bilstein | OME Stage 1 RTR Lift Kit – Lexus GX460
Username or email address *
Lost your password?
Email address *
Sales Representative ID (optional)