USR DEPO 2010-2021 4Runner Black-Out Facelift 2014+ Style LED Tail Lights

2010-2021 Toyota 4Runner All Black-Out Facelift 2014+ Style LED Tail Lights Made by DEPO

Kit Contents:

• 2 Pieces Set (Left + Right) – Made by DEPO (ISO 2001 Certified Company – Excellent Quality!)
• Product Review + Step by Step Installation Instructions

Features:

• More aggressive “TRD” All Black Housing look, replacing the “Chrome” seen on the Stock 14+ Models.
• Great news For 2010-2013 owners that Wire adapters with sockets and bulbs are included to allow a True Plug and Play Solution and gives you the Latest 4Runner Look!
• For 2014-2021 owners, always want that Stealth Black “Nightshade Edition” look, this tail light will complete it for you.
• The New Tail Lights not only give you the latest 14+ 4Runner Look but replaces the Inner Outdated Chrome Design with the New Black Interior along with the additional benefit of being Manufacturer Sealed!
• Black Housing / Clear with ABS Plastic Lens.
• Bulb Specification: Parking/Brake: Built-In LEDs, 921 Incandescent Reverse Bulb, 7440A Incandescent Amber Turn Signal Bulb.
• DOT/SAE Approved!
• An easy to install Module which activates the LED Brake Lights on your 4Runner to function as Turn Signals AS WELL!!
• The new modules connectors plug right onto the tail light on one end and the OEM Plug on the other.
• Will NOT interfere with your Brake Light nor Signal Function will affect one another therefore
• OPTIONAL: When installing the module, your original incandescent bulbs will NO LONGER WORK. If you REPLACE the bulb with a White LED Bulb and complete the tapping shown, the old signal light will now function as an additional Reverse Light!

Please Note: 

• If you have purchased an aftermarket full LED headlight (Morimoto XB for example) and/or you have upgraded any part of your car’s turn signal light to LED, you might run into a hyper flash issue when you use our Canbus LED turn signal bulbs. Please understand why it would have hyper flash is due to your car will have hyper flash triggered when a minimum power draw is not reached. When you start to change your incandescent light to LED, it starts to use less and less power, so to a point passing the minimum requirement, hyper flash kicks in to warn the driver as the car thinks some bulb is out in the system. In those cases, usually adding a resistor will cure the hyper flash. In other words, our Canbus LED bulbs will work and function normally if you have the stock setting.
• Minor Rewiring needed, Soldering or Tapping needed to complete the connection for LED License Plate Light Assembly