No products in the cart.
Return to shop
Unlike most Bilstein 5100s online, the YotaMafia kit comes pre-assembled, is torqued to spec, and is ready to bolt in upon arrival.
Let our Ready To Roll Bilstein / OME lift kit take you on your next adventure.
2899 Rear Springs are Special Order, Call for additional lead time.
Current lead time: 2-3 weeks
LD – Light duty coils, intended to be used under stock vehicle weight. MD – Medium duty coils, intended to be used under stock weight to gain 2.5″ of lift or under medium weight (70-100lbs) to gain 2″ of lift. HD – Heavy duty coils, intended to be used under heavy weight (100lbs+) to gain 2.5″ of lift.
Select an option...Option 1: OME 2884: LD, 1.5″ liftOption 2: OME 2885: MD, 2.5″ with no weight. 2″ with weightOption 3: OME 2887: HD, 2.5″ with weight
LD – Light duty coils, intended to be used under stock vehicle weight. MD – Medium duty coils, intended to be used under stock weight to gain 2.5″ of lift or under medium weight (100-300lbs) to gain 2″ of lift. HD – Heavy duty coils, intended to be used under heavy weight (300lbs+) to gain 2.5″ of lift.
Select an option...Option 1: OME 2889: LD, 2″ of lift – 30% stiffer than factoryOption 2: OME 2898: MD, 2.5″ with no weight. 2″ with weightOption 3: OME 2899: HD, 2.5″ with weight (Special Order)
Use these 5mm trim spacers to correct drivers side lean or use one on each side to gain an additional half inch of lift. Laser Cut aluminum and powder coated black for Corrosion resistance .
Select an option...No need for spacersAdd one trim spacer (+$31.00)Add two trim spacers (+$62.00)
100% USA made, uses stainless steel fittings, DOT coated, uses stainless steel braided hose, 3000 PSI tested, 17” long
Select an option...No thanksFront Extended Brake Lines 15% OFF (+$47.60)Rear extended brake lines 15% OFF (+$67.99)Front and rear extended brake lines 15% OFF (+$115.59)
Stage 1: Kit includes : 1 Pair of Spring Tail Isolators, 1 Pair of Spring Locators, Mounting Hardware
Stage 2: This bolt in conversion kit makes it so you are able to convert the factory rear airbag suspension to use coil springs. Properly molded lower coil spring poly isolator to ensure the spring doesn’t move out of position, and doesn’t create any noise. Kit includes: 2 poly coil isolators for base of the coil to capture the pigtail correctly, and 2 OE type rubber upper coil isolators with built-in bump stops. This kit was designed for and will work on all rear airbag-equipped Toyota Land Cruiser Prado 120 and 150 series, as well as Lexus GX470 and GX460 models.
Select an option...No, I will order this separatelyStage 1 (+$79.95)Stage 2 (+$325.00)
DuroBumps are custom-fitted and built with the durable performance of dual durometer rubber to provide a smoother progressive dampening. Reduce hard bottom outs and gain better off road control and comfort vs harsh-on-contact OEM bump stops.
Select an option...None4.25″ Rear Bumpstops (+$249.99)5.25″ Rear Bump Stops 4Runner (+$269.99)
Select an option...NoneFront Bump Stops (+$219.99)
With years of experience and extensive product testing, we have pieced together the best bang for your buck suspension kit. This kit is more then a lift, it will change your GX’s ride quality from brake diving and body roll to a comfortable firmer ride using quality suspension components sourced using Bilstein 5100’s and ARB Old Man Emu coils. Pairing these parts together allows you to use a Bilstein 5100 and keep the cir-clip on the bottom so we get full up travel and down travel on the front shocks. This is an improved way of lifting your GX as opposed to just using the 5100s and pre-loading a stock coil.
This kit also utilizes SPC upper Control arms for improved handling, slightly more down travel and a much better true alignment opposed to what your factory upper control arms can provide when lifted.
Install time is 6 hours with upper control arms.
There are no reviews yet.
Your review *
1st Gen Tundra Lift Kits
Bilstein | OME RTR Lift Kit – 1st Gen Tundra
GX 460 Lift Kits
Bilstein | OME Stage 1 RTR Lift Kit – Lexus GX460
4th Gen 4Runner Lift Kits
PRE-ORDER OME MT64 Standard Suspension Kit for 4Runner (03-09), FJ Cruiser (07-09)
5th Gen 4Runner Lift Kits
PRE-ORDER OME MT64 Standard Suspension Kit for 4Runner (10-23), FJ Cruiser (10-14)
2nd Gen Tacoma Lift Kits
Bilstein 8112 Series Front + Rear 0.6-2.5” Lift for 05+ Tacoma
Bilstein B8 6112 Shock Kit 10+ 4runner | GX460 | 10-14 FJ Cruiser
Username or email address *
Remember me Log in
Lost your password?
Email address *