C4 2014+ 4runner Lo Pro Winch Bumper

5th Generation Toyota 4Runner Lo Pro C4 Fabrication Winch Bumper (2014+)

*This does not fit 2010 – 2013 4Runners

Sometimes you just don’t want a complete front bumper replacement or hybrid bumper for the front end of your 5th Gen 4Runner, and that’s where the C4 Fabrication Lo Pro Bumper comes into play. Not only does it give you the benefits of running a winch and lightbar like the full size bumpers, but it comes in at half the weight and cost.

While a lot of trimming and cutting is required for hybrid bumpers, the C4 Fabrication Lo Pro Bumper only requires cutting in one section of the bumper and that’s the lower valance where the Lo Pro Bumper sits/attaches to the frame. Of course if you decide to go with their high clearance addition you will be required to cut more of the bumper, though in the end this will allow you to run larger tires more easily, as well as increase your approach angle.

There are multiple versions of this bumper made on the market, however C4 Fabrications Lo Pro Bumper has some special advantages over the others. For starters it offers the least protrusion possible on the market. This means while others may look the same, you’ll notice theirs push out much further than yours does. Ultimately this also means your bumper is less likely to make contact with something like a rock while on the trail than the other guys. If you happen to have a newer version of the 5th Gen 4Runner that has the Toyota Safety Sense feature, the full-height bull bar option DOES NOT interfere with the system.

Much like all their bumpers, the pre-welded mounts for light bar have zero issues fitting Baja Designs lightbars. Other lights bars on the market such as RIGID and ExtremeLED may need special hardware to help fit them correctly.

The majority of 8-10K winches on the market will also fit the bumper, but you may need to relocate the control box for some. Normally the AC line is slightly bent to allow the control box to fit, but this can be skipped for some winches if you relocate the control box.

C4 Fabrication Lo Pro Bumper specifications:

• Other brands of lights not guaranteed to fit perfectly.
• CNC cut and press brake bent from 3/16″ P&O steel.
• Fits all ’14 and up 4Runner’s except the Limited model.
• Comes with all mounting brackets and hardware needed for install.
• Product will be shipped through FedEx ground home delivery or to a commercial address if one is provided.
• Fits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).
• We recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.
• Cutting of the center plastic portion of the factory bumper cover is required to install the bumper.
• Weighs 75lbs
• Works with TRD Pro Skid Plate
• Product ships bare steel, we do not offer powder coating at this time.

TSS Model 4Runners

We have now verified that the Full Height Bull Bar DOES NOT interfere with TSS on 2020 and 2021 models. The Mid height bull bar definitely will block the TSS sensor and cause a malfunction. We have also confirmed that the lo-pro DOES NOT interfere with TSS or Multi-Terrain Monitoring (MTM) system on 2022 models.

Light Bar Fitment

Bumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit. If you have ordered an Extreme X6S 30″ Amber/White light bar from us with your bumper you will receive a pair of mounting brackets to use for mounting the light into the bumper which will allow it to fit properly. If you did NOT order a 30″ X6S light bar from us and you are planning to install one, you will need to purchase these mounting brackets in order to install the light properly.

Powder Coating? 

It is important to note that C4 Fabrication does not offer powder coating at this time, meaning the bumper will ship bare steel. While this can be inconvenient to some, it’s a positive as you don’t have to worry about chips in powder coat during the shipment process, which tends to happen more than often with companies who offer powder coating.

Lead Times?

Lead times are typically around 8-weeks, and are shipped via freight, though in most cases they can be sent to your home address for additional costs.
Depending on garage setup, install time can take anywhere from 4-7 hours.

If you are an off-roader who goes out solo or in a group, and want the ability to self recover, as well as recover others who may be stuck, while maintaining the factory look of the 5th Gen 4Runner with minimal weight, the C4 Fabrication Lo Pro Bumper should be your number one pick!

Installation Instructions