C4 5th Gen 4Runner Hybrid Front Bumper (2010+)
The 2014+ 4Runner Hybrid bumper is a unique combination of a plate steel center with round tube on the sides.
This design allows you to achieve a lighter bumper while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.
-SHIPS BARE STEEL, powder coat finish not available. Product will need to be painted or powder coated to prevent rusting.
-Please allow 8 weeks production time.
In the market for a steel front bumper for your 5th Generation 4Runner? Look no further than the newly release C4 Fabrication Hybrid Bumper. Not only does this bumper give you the look of a tube style bumper, while allowing you to still mount a winch, lightbar, and other accessories, it also gives you a lighter option compared to non-hybrid bumpers on the market.
C4 Fabrication’s Hybrid Bumper allows you to mount a hidden 8-12K winch behind the center plate section of the bumper, as well as mount up to four different styles of lighting. You have a dedicated spot for a lightbar, and up to three (depending on light choices), to fit in the tube sections of the bumper. C4 Fabrication uses the Baja Designs S2, Squadron, and XL lights for the tube sections.
C4 Fabrication recommends Baja or Rigid lighting for their Hybrid Bumper light bar cutouts as the pre-welded mounts are designed for them. This does not mean other light bars will not work with the bar, they may just require some adjustments to fit.
Specs on the C4 Fabrication Hybrid Bumper are the following:
3/16” laser cut P&O steel
1/4” thick mounting plates
3/4” thick D-Ring tabs
.120 wall tubes
1 3/4” diameter HREW tubing
120-135lbs depending on bull bar option
Bull Bar (none, mid-height, full-height)
30” Lightbar cutout
Windshield washer reservoir skid
The C4 Fabrication Hybrid Bumper requires trimming of the OEM plastic bumper, as well as the removal of factory pieces behind the OEM bumper. If you have installed their Lo Pro Bumper, you likely have already removed some of the pieces required for this install.
C4 Fabrication is known for their precision fitment of products, and because of this the OEM power steering metal line will need to be removed and replaced with a new power steering condenser. This allows the Hybrid bumper to sit flush with the body, allowing the least amount of protrusion possible, as well as fit the majority of 8-12K winches on the market (some may need their control boxes relocated).
It it important to note that C4 Fabrication does not offer power coating at this time, meaning the bumper will ship bare steel. While this can be inconvenient to some, it’s a positive as you don’t have to worry about chips in powder coat during the shipment process, which tends to happen more than often with companies who offer powder coating.
Lead times are typically around 8-weeks, and are shipped via freight, though in most cases they can be sent to your home address for additional costs.
Depending on garage setup, install time can take anywhere from 4-7 hours.
If you are looking for a steel front bumper to stand you out in the ever-growing crowd of Toyota 4Runners, the C4 Fabrication Hybrid Bumper is the bumper for you. Not only does it give the 5th Generation 4Runner an even more aggressive front end look than stock, it also allows you to fit larger tires without issue — 35’s are no longer a problem like they were with the stock bumper.
|Toyota||4Runner||2010 - 2021|