No products in the cart.
The 4Runner Rooofrac 3/4 is a modular, adjustable, and completely bolt together 3/4 length roof rack for 2010-2018 Toyota 4Runner. See also our FULL length model.
The rack consists of 2 laser cut side rails constructed of 1/4″ 5052 aluminum plate. These rails have 2 mounting tabs each that will allow you to bolt the rack into the 4 factory mounting holes on each side of the roof. No drilling is required.
The crossbars are made from a 1″ x 2″ aluminum extrusion that have 2 top facing T-slot channel, a fore and aft channel and 2 bottom facn channels. This offers numerous solutions for tie down options, cargo security, and the addition of accessories such as tool mounts or lighting. The rack comes shipped with a bare aluminum finish but can be powdercoated for an additional fee. All assembly hardware comes in a black zinc finish so as to match a black paint or powdercoat finish on the final product. All mounting hardware is either stainless steel or high quality zn plated. The rack also includes a 1/8″ 5052 aluminum plate wind deflector to help with aeroodynamics and prevent wind noise.
The rack is completely modular in that you choose how your rack is configured. Refer to the gallery for an example of standard configurations we have used based on different load sizes and weights. You can also choose the number of cross bars you assemble your rack with. The rack comes standard with 6 cross bars for cargo and 1 additional for mounting of a wind deflector, lightbar or combination of the two.
Weight capacity of the racks varies based on the number of crossbars used and their configuration.
Select an option...STANDARDCUTOUT FOR 30″ LIGHTBARSCUTOUT FOR 40″ LIGHTBARS
NoneLight Bar Bracket (+$27.00)No Light Bar Bracket
All products built and designed by PrInSu Design Studio are intended for off-road use and should be assembled, installed, and used according to PrInSu Design Studio’s recommendations. PrInSu Design Studio products should be used safely with good judgment towards others and the environment. By installing PrInSu Design Studio Products on your vehicle you assume all liability. PrInSu Design Studio will not be held liable for damages or loss associated with the installation or use of its products.
Be smart, use good judgement, don’t overload your vehicle to the point of inferior handling and maneuverability!
There are no reviews yet.
Your review *
Prinsu 2nd Gen Tundra CrewMax Cab Roof Rack (2007+)
Prinsu 5th Gen 4Runner Non-Drill Roof Rack – Full (2010+)
Prinsu 3rd Gen 4Runner Prinsu Full Roof Rack (1996-2002)
5TH GEN RAV4 (19-22) ROOF RACK | THE SNOWMASS | SHERPA
5th Gen 4Runner
5TH GEN 4RUNNER (10-22) HALF ROOF RACK | THE NEEDLE | SHERPA
Front Runner Toyota 4Runner (5TH GEN) Slimline II Roof Rack Kit
Prinsu Rav4 Roof Rack | 2019-2021
Lexus GX470 Prinsu Full Roof Rack
Username or email address *
Remember me Log in
Lost your password?
Email address *
A link to set a new password will be sent to your email address.
Sales Representative ID (optional)