Icon Stage 3 with Tubular or Billet UCAs For 5th Gen 4Runner

Icon Overland Series 3″ Lift Rear Coil Springs

• 3” ride height when unloaded and 2” ride height if weight is added (drawers, fridge, bumper, etc.). If you have a fully stock 4Runner, you can run the 3″ springs for a full 3″ lift in the rear. If you plan on adding lots of weight (bumpers, drawers, fridge, tire carrier, then your ride height will settle at 2″ of lift).

Extended Brake Lines:

• Extended brake lines are recommended for 3″ lifts and larger in the rear. We pair our Icon Lift Kits with our in-house YotaMafia extended brake lines for the 5th Gen 4Runner. Made from stainless steel braided line and coated in DOT red polymer hose it will stand up to anything. Using Toyota fittings to directly plug into all Toyota applications.

Features:

• Increased wheel travel and ride quality over stock
• Bolt-on system means no cutting or welding necessary for install
• Vehicle specific tuned front and rear shocks for superior shock damping and control
• Adjustable coilovers provide 0-3.5″ of front lift height
• Extended Travel coilovers matched with ICON UCA provides increased front droop travel
• Tubular rear lower links offer increased strength, improved geometry, and pinion angle adjustment
• 6061 aircraft grade aluminum CNC machined components
• Corrosion-resistant CAD-plated coilover shock body with 7/8″ shaft
• FK Rod End bearings for extended longevity and minimal deflection
• 2.0 Aluminum Series rear internal reservoir shocks with 5/8″ shafts

Kit Contents:

• 58451DJ (QTY: 1) | 07-UP FJ/03-UP 4RUNNER TUBULAR UCA DJ KIT
• 58647 (QTY: 1) | 10-UP FJ/4RUNNER EXT TRAVEL 2.5 VS IR COILOVER KIT
• 52700 (QTY: 1) | 07-UP FJ/03-UP 4RUNNER REAR 2″ SPRING KIT
• 56505 (QTY: 2) | 07-UP FJ/03-UP 4 RUNNER 1-3″ REAR 2.0 VS IR
• 54000T (QTY: 1) | 07-UP FJ/03-UP 4RNR/08-UP LC 200 TUBULAR LOWER TRAILING ARM KIT

Resources:

• Full Review on Icon Shocks
• Step by Step Installation Instructions