{"title":"Bump Stops","description":"\u003cp\u003eControl suspension travel and protect your components with bump stops for Toyota and Lexus off-road builds. Progressive and hydraulic options that soften impacts and prevent bottoming out on the trail.\u003c\/p\u003e","products":[{"product_id":"3rd-gen-toyota-4runner-3-5-rear-bump-stops","title":"1996-2002 3rd Gen 4Runner DuroBumps Rear Bump Stops (3.5 inch Tall) [DBR354R]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBR354R replaces the rear bump stops on the 1996–2002 3rd Gen 4Runner with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eThe 3.5\" height is the pick for \u003cstrong\u003estock-height trucks and mild lifts up to 2\"\u003c\/strong\u003e (fully loaded) — it will not limit wheel up-travel. Running 2\"+ of lift? Step up to the 5.25\" DBR525.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo loss of up-travel\u003c\/strong\u003e — slightly taller than OEM, so it cushions before the ultimate stop without limiting wheel travel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50089663103199,"sku":"DBR354R","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps_3rd_gen_4Runner_3.5_rear_bump_stops_01-2.jpg?v=1780921251"},{"product_id":"3rd-gen-toyota-tacoma-front-bump-stops","title":"2016-2023 3rd Gen Tacoma DuroBumps Front Bump Stops [DBF212]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBF212 replaces the front bump stops on the 2016–2023 3rd Gen Tacoma with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eFits stock height through 3\" of lift and will not limit your wheel up-travel — slightly taller than OEM so it compresses under load and deadens the impact just before the ultimate stop.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo loss of up-travel\u003c\/strong\u003e — slightly taller than OEM, so it cushions before the ultimate stop without limiting wheel travel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50089663922399,"sku":"DBF212","price":214.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps_4th_gen_4Runner_bump_stops_01-15.jpg?v=1780921308"},{"product_id":"1st-gen-toyota-tacoma-front-bump-stops","title":"1995-2004 1st Gen Tacoma DuroBumps Front Bump Stops [DBF24R]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBF24R replaces the front bump stops on the 1995–2004 1st Gen Tacoma with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eThe only aftermarket bump stop built with the \u003cstrong\u003e14° taper\u003c\/strong\u003e these trucks need: the stop mounts to the lower control arm and does not meet the strike pad squarely, so without the taper the rubber shears and wears. Fits stock height through 3\" of lift with no loss of up-travel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo loss of up-travel\u003c\/strong\u003e — slightly taller than OEM, so it cushions before the ultimate stop without limiting wheel travel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50089664217311,"sku":"DBF24R","price":205.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps_3rd_gen_4Runner_bump_stops_01-9.jpg?v=1780921328"},{"product_id":"3rd-gen-toyota-4runner-front-5-25-rear-bump-stop-set","title":"1996-2002 3rd Gen 4Runner DuroBumps Front \u0026 Rear Bump Stop Set (5.25 inch Rear) [DBF24R\/DBR525]","description":"\u003cp\u003eThe complete DuroBumps refresh for the 1996–2002 3rd Gen 4Runner: front and rear dual-durometer bump stops that engage softly and stiffen progressively, replacing the hockey-puck factory stops at both ends of the truck in their OEM locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFront (DBF24R):\u003c\/strong\u003e the only aftermarket stop with the 14° taper these LCA-mounted fronts need for even contact; fits 0–3\" of lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRear:\u003c\/strong\u003e the 5.25\" DBR525 — equivalent to a 2\" block spacer with OEM stops, for trucks with \u003cstrong\u003e2\"+ of rear lift\u003c\/strong\u003e (limits up-travel by 2\").\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50089664446687,"sku":"DBF24R\/DBR525","price":445.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/Duro_Bumps_Set_3rd_Gen_4Runner_5-small-1.jpg?v=1780921347"},{"product_id":"2nd-gen-toyota-tacoma-front-bump-stops","title":"2005-2015 2nd Gen Tacoma DuroBumps Front Bump Stops [DBF212]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBF212 replaces the front bump stops on the 2005–2015 2nd Gen Tacoma with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eFits stock height through 3\" of lift and will not limit your wheel up-travel — slightly taller than OEM so it compresses under load and deadens the impact just before the ultimate stop.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo loss of up-travel\u003c\/strong\u003e — slightly taller than OEM, so it cushions before the ultimate stop without limiting wheel travel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50089664676063,"sku":"DBF212","price":214.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps_4th_gen_4Runner_bump_stops_01-16.jpg?v=1780921365"},{"product_id":"3rd-gen-toyota-4runner-front-bump-stops","title":"1996-2002 3rd Gen 4Runner DuroBumps Front Bump Stops [DBF24R]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBF24R replaces the front bump stops on the 1996–2002 3rd Gen 4Runner with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eThe only aftermarket bump stop built with the \u003cstrong\u003e14° taper\u003c\/strong\u003e these trucks need: the stop mounts to the lower control arm and does not meet the strike pad squarely, so without the taper the rubber shears and wears. Fits stock height through 3\" of lift with no loss of up-travel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo loss of up-travel\u003c\/strong\u003e — slightly taller than OEM, so it cushions before the ultimate stop without limiting wheel travel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50089664970975,"sku":"DBF24R","price":205.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps_3rd_gen_4Runner_bump_stops_01-11.jpg?v=1780921383"},{"product_id":"3rd-gen-toyota-4runner-5-25-rear-bump-stops","title":"1996-2002 3rd Gen 4Runner DuroBumps Rear Bump Stops (5.25 inch Tall) [DBR525]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBR525 replaces the rear bump stops on the 1996–2002 3rd Gen 4Runner with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eRunning the equivalent of a 2\" block spacer with OEM stops, it limits wheel up-travel by 2\" and is designed for trucks with \u003cstrong\u003e2\" or more of rear lift\u003c\/strong\u003e (fully loaded) — stopping the suspension before extended-travel shocks bottom out. Under 2\" of lift, run the 3.5\" DBR354R instead.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50089665233119,"sku":"DBR525","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps_3rd_gen_4Runner_5.25_rear_bump_stops_01-1.jpg?v=1780921402"},{"product_id":"3rd-gen-toyota-4runner-front-3-5-rear-bump-stop-set","title":"1996-2002 3rd Gen 4Runner DuroBumps Front \u0026 Rear Bump Stop Set (3.5 inch Rear) [DBF24R\/DBR354R]","description":"\u003cp\u003eThe complete DuroBumps refresh for the 1996–2002 3rd Gen 4Runner: front and rear dual-durometer bump stops that engage softly and stiffen progressively, replacing the hockey-puck factory stops at both ends of the truck in their OEM locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFront (DBF24R):\u003c\/strong\u003e the only aftermarket stop with the 14° taper these LCA-mounted fronts need for even contact; fits 0–3\" of lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRear:\u003c\/strong\u003e the 3.5\" DBR354R — for stock height through 2\" of lift, with no loss of up-travel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50089665462495,"sku":"DBF24R\/DBR354R","price":445.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/Duro_Bumps_Set_3rd_Gen_4Runner_3-small-2.jpg?v=1780921421"},{"product_id":"4th-gen-toyota-4runner-front-bump-stops-2003-2009","title":"2003-2009 4th Gen 4Runner DuroBumps Front Bump Stops [DBF212]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBF212 replaces the front bump stops on the 2003–2009 4th Gen 4Runner with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eFits stock height through 3\" of lift and will not limit your wheel up-travel — slightly taller than OEM so it compresses under load and deadens the impact just before the ultimate stop.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo loss of up-travel\u003c\/strong\u003e — slightly taller than OEM, so it cushions before the ultimate stop without limiting wheel travel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50089665691871,"sku":"DBF212","price":214.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps_4th_gen_4Runner_bump_stops_01-17.jpg?v=1780921438"},{"product_id":"5th-gen-toyota-4runner-front-bump-stops-2010","title":"2010-2024 5th Gen 4Runner DuroBumps Front Bump Stops [DBF212]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBF212 replaces the front bump stops on the 2010–2024 5th Gen 4Runner with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eFits stock height through 3\" of lift and will not limit your wheel up-travel — slightly taller than OEM so it compresses under load and deadens the impact just before the ultimate stop.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo loss of up-travel\u003c\/strong\u003e — slightly taller than OEM, so it cushions before the ultimate stop without limiting wheel travel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50089665921247,"sku":"DBF212","price":214.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps_4th_gen_4Runner_bump_stops_01-18.jpg?v=1780921456"},{"product_id":"2nd-gen-toyota-tacoma-4-25-rear-bump-stops-2005-2015","title":"2005-2015 2nd Gen Tacoma DuroBumps Rear Bump Stops (4.25 inch Tall) [DBR425TU]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBR425TU replaces the rear bump stops on the 2005–2015 2nd Gen Tacoma with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eRunning the equivalent of a 2\" block spacer with OEM stops, it limits wheel up-travel by 2\" and is designed for trucks with \u003cstrong\u003e2\" or more of rear lift\u003c\/strong\u003e (fully loaded) — stopping the suspension before extended-travel shocks bottom out. Installs under the U-bolts in the same location as the OEM stops.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Standard (included)","offer_id":50089666412767,"sku":"DBR425TU","price":249.99,"currency_code":"USD","in_stock":true},{"title":"U-Bolt Flip Kit 7.75\" Length U-Bolt ( $131.25)","offer_id":50089666445535,"sku":"DBR425TU\/DBFK01-775","price":389.98,"currency_code":"USD","in_stock":true},{"title":"U-Bolt Flip Kit 8.85\" Length U-Bolt ( $131.25)","offer_id":50089666478303,"sku":"DBR425TU\/DBFK01-885","price":393.99,"currency_code":"USD","in_stock":true},{"title":"U-Bolt Flip Kit 9.4\" Length U-Bolt ( $131.25)","offer_id":50089666511071,"sku":"DBR425TU\/DBFK01-94","price":401.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps_3rd_gen_Tacoma_5.25_rear_bump_stops_01-8.jpg?v=1780921475"},{"product_id":"5th-gen-toyota-4runner-rear-bump-stops-2010","title":"2010-2024 5th Gen 4Runner DuroBumps Rear Bump Stops (4.25 inch Tall) [DBR425]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBR425 replaces the rear bump stops on the 2010–2024 5th Gen 4Runner with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eRunning the equivalent of a 2\" block spacer with OEM stops, it limits wheel up-travel by 2\" and is designed for trucks with \u003cstrong\u003e2\" or more of rear lift\u003c\/strong\u003e (fully loaded) — stopping the suspension before extended-travel shocks bottom out.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50089667559647,"sku":"DBR425","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps_4th__5th_gen_4Runner_rear_bump_stops_01-9.jpg?v=1780921540"},{"product_id":"4th-gen-toyota-4runner-rear-bump-stops-2003-2009","title":"2003-2009 4th Gen 4Runner DuroBumps Rear Bump Stops (4.25 inch Tall) [DBR425]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBR425 replaces the rear bump stops on the 2003–2009 4th Gen 4Runner with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eRunning the equivalent of a 2\" block spacer with OEM stops, it limits wheel up-travel by 2\" and is designed for trucks with \u003cstrong\u003e2\" or more of rear lift\u003c\/strong\u003e (fully loaded) — stopping the suspension before extended-travel shocks bottom out.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50089668018399,"sku":"DBR425","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps_4th__5th_gen_4Runner_rear_bump_stops_01-10.jpg?v=1780921558"},{"product_id":"3rd-gen-toyota-tacoma-front-rear-bump-stops-with-u-bolt-flip-kit-2016","title":"2016-2023 3rd Gen Tacoma DuroBumps Front \u0026 Rear Bump Stop Set [DBF212\/DBR35TU]","description":"\u003cp\u003eThe complete DuroBumps refresh for the 2016–2023 3rd Gen Tacoma: front and rear dual-durometer bump stops that engage softly and stiffen progressively, replacing the hockey-puck factory stops at both ends of the truck in their OEM locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFront (DBF212):\u003c\/strong\u003e slightly taller than OEM, fits 0–3\" of lift with no loss of up-travel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRear:\u003c\/strong\u003e the 3.5\" DBR35TU — mounts under the U-bolts, for stock height through 2\" of lift with no loss of up-travel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"3.5\" - DBR35TU \/ Standard Baseplate","offer_id":50089668444383,"sku":"DBF212\/DBR35TU","price":444.98,"currency_code":"USD","in_stock":true},{"title":"3.5\" - DBR35TU \/ 7.75\" - DBFK01-775","offer_id":50089668477151,"sku":"DBF212\/DBR35TU\/DBFK01-775","price":584.97,"currency_code":"USD","in_stock":true},{"title":"3.5\" - DBR35TU \/ 8.85\" - DBFK01-885","offer_id":50089668509919,"sku":"DBF212\/DBR35TU\/DBFK01-885","price":588.98,"currency_code":"USD","in_stock":true},{"title":"3.5\" - DBR35TU \/ 9.4\" - DBFK01-94","offer_id":50089668542687,"sku":"DBF212\/DBR35TU\/DBFK01-94","price":596.98,"currency_code":"USD","in_stock":true},{"title":"4.25\" - DBR425TU \/ Standard Baseplate","offer_id":50089668575455,"sku":"DBF212\/DBR425TU","price":464.98,"currency_code":"USD","in_stock":true},{"title":"4.25\" - DBR425TU \/ 7.75\" - DBFK01-775","offer_id":50089668608223,"sku":"DBF212\/DBR425TU\/DBFK01-775","price":604.97,"currency_code":"USD","in_stock":true},{"title":"4.25\" - DBR425TU \/ 8.85\" - DBFK01-885","offer_id":50089668640991,"sku":"DBF212\/DBR425TU\/DBFK01-885","price":608.98,"currency_code":"USD","in_stock":true},{"title":"4.25\" - DBR425TU \/ 9.4\" - DBFK01-94","offer_id":50089668673759,"sku":"DBF212\/DBR425TU\/DBFK01-94","price":616.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps_2nd_3rd_gen_tacoma_front_4.25_rear_bump_stops_01-2.jpg?v=1780921577"},{"product_id":"toyota-fj-cruiser-front-durobumps","title":"2007-2014 FJ Cruiser DuroBumps Front Bump Stops [DBF212]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBF212 replaces the front bump stops on the 2007–2014 FJ Cruiser with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eFits stock height through 3\" of lift and will not limit your wheel up-travel — slightly taller than OEM so it compresses under load and deadens the impact just before the ultimate stop.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo loss of up-travel\u003c\/strong\u003e — slightly taller than OEM, so it cushions before the ultimate stop without limiting wheel travel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50089668772063,"sku":"DBF212","price":214.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps_4th_gen_4Runner_bump_stops_01-20.jpg?v=1780921595"},{"product_id":"lexus-front-durobumps","title":"2003-2023 Lexus GX470 \u0026 GX460 DuroBumps Front Bump Stops [DBF212]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBF212 replaces the front bump stops on the 2003–2023 Lexus GX470 and GX460 with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eFits stock height through 3\" of lift and will not limit your wheel up-travel — slightly taller than OEM so it compresses under load and deadens the impact just before the ultimate stop.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo loss of up-travel\u003c\/strong\u003e — slightly taller than OEM, so it cushions before the ultimate stop without limiting wheel travel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50089669034207,"sku":"DBF212","price":214.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps_4th_gen_4Runner_bump_stops_02-21.jpg?v=1780921614"},{"product_id":"lexus-rear-durobumps","title":"2003-2023 Lexus GX470 \u0026 GX460 DuroBumps Rear Bump Stops (4.25 inch Tall) [DBR425]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBR425 replaces the rear bump stops on the 2003–2023 Lexus GX470 and GX460 with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eRunning the equivalent of a 2\" block spacer with OEM stops, it limits wheel up-travel by 2\" and is designed for trucks with \u003cstrong\u003e2\" or more of rear lift\u003c\/strong\u003e (fully loaded) — stopping the suspension before extended-travel shocks bottom out.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50089669263583,"sku":"DBR425","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps_4th__5th_gen_4Runner_rear_bump_stops_01-11.jpg?v=1780921632"},{"product_id":"2nd-gen-toyota-tundra-front-durobumps","title":"2007+ 2nd \u0026 3rd Gen Tundra DuroBumps Front Bump Stops [DBF2T]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBF2T replaces the front bump stops on the 2007+ 2nd and 3rd Gen Tundra with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eFits stock height through 3\" of lift and will not limit your wheel up-travel — slightly taller than OEM so it compresses under load and deadens the impact just before the ultimate stop.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo loss of up-travel\u003c\/strong\u003e — slightly taller than OEM, so it cushions before the ultimate stop without limiting wheel travel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50089669689567,"sku":"DBF2T","price":219.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps_3rd_gen_4Runner_bump_stops_01-13.jpg?v=1780921650"},{"product_id":"fj-cruiser-rear-durobumps","title":"2007-2014 FJ Cruiser DuroBumps Rear Bump Stops (4.25 inch Tall) [DBR425]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBR425 replaces the rear bump stops on the 2007–2014 FJ Cruiser with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eRunning the equivalent of a 2\" block spacer with OEM stops, it limits wheel up-travel by 2\" and is designed for trucks with \u003cstrong\u003e2\" or more of rear lift\u003c\/strong\u003e (fully loaded) — stopping the suspension before extended-travel shocks bottom out.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50089670017247,"sku":"DBR425","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps_4th__5th_gen_4Runner_rear_bump_stops_01-12.jpg?v=1780921667"},{"product_id":"3rd-gen-tacoma-rear-bump-stops-4-25-2016","title":"2016-2023 3rd Gen Tacoma DuroBumps Rear Bump Stops (4.25 inch Tall) [DBR425TU]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBR425TU replaces the rear bump stops on the 2016–2023 3rd Gen Tacoma with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eRunning the equivalent of a 2\" block spacer with OEM stops, it limits wheel up-travel by 2\" and is designed for trucks with \u003cstrong\u003e2\" or more of rear lift\u003c\/strong\u003e (fully loaded) — stopping the suspension before extended-travel shocks bottom out. Installs under the U-bolts in the same location as the OEM stops.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Standard (included)","offer_id":50089670475999,"sku":"DBR425TU","price":249.99,"currency_code":"USD","in_stock":true},{"title":"U-Bolt Flip Kit 7.75\" Length U-Bolt ( $131.25)","offer_id":50089670508767,"sku":"DBR425TU\/DBFK01-775","price":389.98,"currency_code":"USD","in_stock":true},{"title":"U-Bolt Flip Kit 8.85\" Length U-Bolt ( $131.25)","offer_id":50089670541535,"sku":"DBR425TU\/DBFK01-885","price":393.99,"currency_code":"USD","in_stock":true},{"title":"U-Bolt Flip Kit 9.4\" Length U-Bolt ( $131.25)","offer_id":50089670574303,"sku":"DBR425TU\/DBFK01-94","price":401.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps_3rd_gen_Tacoma_5.25_rear_bump_stops_01-11.jpg?v=1780921686"},{"product_id":"3rd-gen-tacoma-rear-bump-stops-3-5","title":"2016-2023 3rd Gen Tacoma DuroBumps Rear Bump Stops (3.5 inch Tall) [DBR35TU]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBR35TU replaces the rear bump stops on the 2016–2023 3rd Gen Tacoma with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eThe 3.5\" height is the pick for \u003cstrong\u003estock-height trucks and mild lifts up to 2\"\u003c\/strong\u003e (fully loaded) — it will not limit wheel up-travel. Running 2\"+ of lift? Step up to the 4.25\" DBR425TU. Installs under the U-bolts in the same location as the OEM stops.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo loss of up-travel\u003c\/strong\u003e — slightly taller than OEM, so it cushions before the ultimate stop without limiting wheel travel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Standard (included)","offer_id":50089670803679,"sku":"DBR35TU","price":229.99,"currency_code":"USD","in_stock":true},{"title":"U-Bolt Flip Kit 7.75\" Length U-Bolt ( $131.25)","offer_id":50089670836447,"sku":"DBR35TU\/DBFK01-775","price":369.98,"currency_code":"USD","in_stock":true},{"title":"U-Bolt Flip Kit 8.85\" Length U-Bolt ( $131.25)","offer_id":50089670869215,"sku":"DBR35TU\/DBFK01-885","price":373.99,"currency_code":"USD","in_stock":true},{"title":"U-Bolt Flip Kit 9.4\" Length U-Bolt ( $131.25)","offer_id":50089670901983,"sku":"DBR35TU\/DBFK01-94","price":381.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/Durobumps_Toyota_Tacoma_3.5-Rear_bump_stops_01-7.jpg?v=1780921703"},{"product_id":"3rd-gen-tacoma-rear-bump-stops-3-5-2016-copy","title":"2005-2015 2nd Gen Tacoma DuroBumps Rear Bump Stops (3.5 inch Tall) [DBR35TU]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBR35TU replaces the rear bump stops on the 2005–2015 2nd Gen Tacoma with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eThe 3.5\" height is the pick for \u003cstrong\u003estock-height trucks and mild lifts up to 2\"\u003c\/strong\u003e (fully loaded) — it will not limit wheel up-travel. Running 2\"+ of lift? Step up to the 4.25\" DBR425TU. Installs under the U-bolts in the same location as the OEM stops.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo loss of up-travel\u003c\/strong\u003e — slightly taller than OEM, so it cushions before the ultimate stop without limiting wheel travel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Standard (included)","offer_id":50089671164127,"sku":"DBR35TU","price":229.99,"currency_code":"USD","in_stock":true},{"title":"U-Bolt Flip Kit 7.75\" Length U-Bolt ( $131.25)","offer_id":50089671196895,"sku":"DBR35TU\/DBFK01-775","price":369.98,"currency_code":"USD","in_stock":true},{"title":"U-Bolt Flip Kit 8.85\" Length U-Bolt ( $131.25)","offer_id":50089671229663,"sku":"DBR35TU\/DBFK01-885","price":373.99,"currency_code":"USD","in_stock":true},{"title":"U-Bolt Flip Kit 9.4\" Length U-Bolt ( $131.25)","offer_id":50089671262431,"sku":"DBR35TU\/DBFK01-94","price":381.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/Durobumps_Toyota_Tacoma_3.5-Rear_bump_stops_01-8.jpg?v=1780921722"},{"product_id":"4th-gen-4runner-front-rear-bump-stops-4-25-e2-80-b3-2003-2009","title":"2003-2009 4th Gen 4Runner DuroBumps Front \u0026 Rear Bump Stop Set (4.25 inch Rear) [DBF212\/DBR425]","description":"\u003cp\u003eThe complete DuroBumps refresh for the 2003–2009 4th Gen 4Runner: front and rear dual-durometer bump stops that engage softly and stiffen progressively, replacing the hockey-puck factory stops at both ends of the truck in their OEM locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFront (DBF212):\u003c\/strong\u003e slightly taller than OEM, fits 0–3\" of lift with no loss of up-travel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRear:\u003c\/strong\u003e the 4.25\" DBR425 — equivalent to a 2\" block spacer with OEM stops, for trucks with \u003cstrong\u003e2\"+ of rear lift\u003c\/strong\u003e (limits up-travel by 2\").\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50089672081631,"sku":"DBF212\/DBR425","price":464.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps_4th_gen_4Runner_front_4-25_rear_bump_stops_02-1.jpg?v=1780921769"},{"product_id":"5th-gen-4runner-front-rear-bump-stops-4-25-e2-80-b3-2010","title":"2010-2024 5th Gen 4Runner DuroBumps Front \u0026 Rear Bump Stop Set (3.5 \/ 4.25 \/ 5.25 inch Rear) [DBF212]","description":"\u003cp\u003eThe complete DuroBumps refresh for the 2010–2024 5th Gen 4Runner: front and rear dual-durometer bump stops that engage softly and stiffen progressively, replacing the hockey-puck factory stops at both ends of the truck in their OEM locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFront (DBF212):\u003c\/strong\u003e slightly taller than OEM, fits 0–3\" of lift with no loss of up-travel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRear:\u003c\/strong\u003e your choice of height — 3.5\" DBR35 for stock through 2\" of lift (no travel loss), 4.25\" DBR425 for 2\"+ of lift, or 5.25\" DBR525LT for 3\"+ of lift with extended-travel shocks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"3.5","offer_id":50089672933599,"sku":"DBF212\/DBR35","price":444.98,"currency_code":"USD","in_stock":true},{"title":"4.25","offer_id":50089672966367,"sku":"DBF212\/DBR425","price":464.98,"currency_code":"USD","in_stock":true},{"title":"5.25","offer_id":50089672999135,"sku":"DBF212\/DBR525LT","price":484.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps_5th_gen_4Runner_front_4-25_rear_bump_stops_02-1.jpg?v=1780921788"},{"product_id":"fj-cruiser-front-rear-bump-stops-4-25-e2-80-b3-2007-2014","title":"2007-2014 FJ Cruiser DuroBumps Front \u0026 Rear Bump Stop Set (4.25 inch Rear) [DBF212\/DBR425]","description":"\u003cp\u003eThe complete DuroBumps refresh for the 2007–2014 FJ Cruiser: front and rear dual-durometer bump stops that engage softly and stiffen progressively, replacing the hockey-puck factory stops at both ends of the truck in their OEM locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFront (DBF212):\u003c\/strong\u003e slightly taller than OEM, fits 0–3\" of lift with no loss of up-travel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRear:\u003c\/strong\u003e the 4.25\" DBR425 — equivalent to a 2\" block spacer with OEM stops, for trucks with \u003cstrong\u003e2\"+ of rear lift\u003c\/strong\u003e (limits up-travel by 2\").\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50089673097439,"sku":"DBF212\/DBR425","price":464.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps_fj_cruiser_front_4-25_rear_bump_stops_02-1.jpg?v=1780921807"},{"product_id":"2nd-gen-tacoma-front-rear-set","title":"2005-2015 2nd Gen Tacoma DuroBumps Front \u0026 Rear Bump Stop Set [DBF212\/DBR35TU]","description":"\u003cp\u003eThe complete DuroBumps refresh for the 2005–2015 2nd Gen Tacoma: front and rear dual-durometer bump stops that engage softly and stiffen progressively, replacing the hockey-puck factory stops at both ends of the truck in their OEM locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFront (DBF212):\u003c\/strong\u003e slightly taller than OEM, fits 0–3\" of lift with no loss of up-travel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRear:\u003c\/strong\u003e the 3.5\" DBR35TU — mounts under the U-bolts, for stock height through 2\" of lift with no loss of up-travel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"3.5\" \/ Standard Base Plate","offer_id":50089673949407,"sku":"DBF212\/DBR35TU","price":444.98,"currency_code":"USD","in_stock":true},{"title":"3.5\" \/ 7.75\"","offer_id":50089673982175,"sku":"DBF212\/DBR35TU\/DBFK01-775","price":584.97,"currency_code":"USD","in_stock":true},{"title":"3.5\" \/ 8.85\"","offer_id":50089674014943,"sku":"DBF212\/DBR35TU\/DBFK01-885","price":588.98,"currency_code":"USD","in_stock":true},{"title":"3.5\" \/ 9.4\"","offer_id":50089674047711,"sku":"DBF212\/DBR35TU\/DBFK01-94","price":596.98,"currency_code":"USD","in_stock":true},{"title":"4.25\" \/ Standard Base Plate","offer_id":50089674080479,"sku":"DBF212\/DBR425TU","price":464.98,"currency_code":"USD","in_stock":true},{"title":"4.25\" \/ 7.75\"","offer_id":50089674113247,"sku":"DBF212\/DBR425TU\/DBFK01-775","price":604.97,"currency_code":"USD","in_stock":true},{"title":"4.25\" \/ 8.85\"","offer_id":50089674146015,"sku":"DBF212\/DBR425TU\/DBFK01-885","price":608.98,"currency_code":"USD","in_stock":true},{"title":"4.25\" \/ 9.4\"","offer_id":50089674178783,"sku":"DBF212\/DBR425TU\/DBFK01-94","price":616.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps_2nd_3rd_gen_tacoma_front_4.25_rear_bump_stops_01-3.jpg?v=1780921842"},{"product_id":"hydraulic-fox-bump-stops-2","title":"Hydraulic Fox Bump Stops 2\" (Compatible with 2.25\" and 4\" LT Kits)","description":"\u003ch2\u003eHydraulic Fox Bump Stops 2\" (Compatible with 2.25\" and 4\" LT Kits)\u003c\/h2\u003e\u003cbr\u003eAdd the necessary cushion to prevent your suspension from completely bottoming out with a weld-on hydraulic bump stop kit for the second and third-generation Tacoma. Our kit is designed around the Fox 2.0 bump stops and will maximize the available up travel. The installation requires cutting off the OE bump stops and welding on the new cans. Our kit is designed to work with a secondary shock up to 3\" in diameter.\u003cbr\u003e\u003cbr\u003eCutting, grinding, and welding are required for the installation.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ed1c24;\"\u003e \u003c\/span\u003e","brand":"Fox","offers":[{"title":"Default Title","offer_id":50090984079583,"sku":null,"price":254.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/JD_Fab_12.jpg?v=1780929363"},{"product_id":"5th-gen-4runner-rear-durobumps-bump-stops-5-25-2010","title":"2010-2024 5th Gen 4Runner DuroBumps Rear Bump Stops (5.25 inch Tall) [DBR525LT]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBR525LT replaces the rear bump stops on the 2010–2024 5th Gen 4Runner with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eThe 3\" extension is designed for trucks running \u003cstrong\u003ea minimum of 3\" of lift\u003c\/strong\u003e. It limits wheel up-travel by 3\" — that is the point: it stops the suspension before extended-travel shocks over-compress.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50091429626079,"sku":"DBR525LT","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/duro5.25.webp?v=1780933385"},{"product_id":"200-series-land-cruiser-front-bump-stops","title":"2008-2021 200 Series Land Cruiser \u0026 Lexus LX570 DuroBumps Front Bump Stops [DBF17T]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBF17T replaces the front bump stops on the 2008–2021 200 Series Land Cruiser and Lexus LX570 with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eThe DBF17T replaces the rear-mounted OEM bump stops on the front driver and passenger sides. Fits stock height through 3\" of lift and will not limit your wheel up-travel — slightly taller than OEM so it compresses under load and deadens the impact just before the ultimate stop.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo loss of up-travel\u003c\/strong\u003e — slightly taller than OEM, so it cushions before the ultimate stop without limiting wheel travel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50091698225375,"sku":"DBF17T","price":205.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/DBF17T-00-06-Tundra-Front-Durobumps-0002-scaled.jpg?v=1780936090"},{"product_id":"200-series-land-cruiser-lx570-rear-bump-stops-copy","title":"2008-2021 200 Series Land Cruiser \u0026 Lexus LX570 DuroBumps Rear Bump Stops (3.75 inch Tall) [DBR375]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBR375 replaces the rear bump stops on the 2008–2021 200 Series Land Cruiser and Lexus LX570 with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eInstalls quickly with basic hand tools and the provided hardware, and once in place it protects your shocks from over-compression and bottom-out damage — on the trail and on the street.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50091699568863,"sku":"DBR375","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/DBR375-scaled.jpg?v=1780936109"},{"product_id":"03-23-4runner-07-14-fj-cruiser-03-09-gx470-10-23-gx460-rear-durobumps-bump-stops-3-5","title":"2003-2023 4Runner, FJ Cruiser, GX470 \u0026 GX460 DuroBumps Rear Bump Stops (3.5 inch Tall) [DBR35]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBR35 replaces the rear bump stops on the 2003–2023 4Runner, 2007–2014 FJ Cruiser, and Lexus GX470\/GX460 with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eThe 3.5\" height is the pick for \u003cstrong\u003estock-height trucks and mild lifts up to 2\"\u003c\/strong\u003e (fully loaded) — it will not limit wheel up-travel. Running 2\"+ of lift? Step up to the 4.25\" DBR425.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo loss of up-travel\u003c\/strong\u003e — slightly taller than OEM, so it cushions before the ultimate stop without limiting wheel travel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50091853971679,"sku":"DBR35","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/DBR35-Main-800x800-1-510x510-1.webp?v=1780941155"},{"product_id":"durobumps-2-extended-rear-bump-stops-for-1st-gen-sequoia-100-series-land-cruiser","title":"80\/100 Series Land Cruiser, Lexus LX \u0026 1st Gen Sequoia DuroBumps 2-Inch Extended Rear Bump Stops (4.25 inch Tall) [DBRLC425]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBRLC425 replaces the rear bump stops on the 1990–2007 80\/100 Series Land Cruiser, 1996–2007 Lexus LX, and 2001–2007 Sequoia with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eRunning the equivalent of a 2\" block spacer with OEM stops, it limits wheel up-travel by 2\" and is designed for trucks with \u003cstrong\u003e2\" or more of rear lift\u003c\/strong\u003e (fully loaded) — stopping the suspension before extended-travel shocks bottom out.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50091863113951,"sku":"DBRLC425","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/DBRLC425-Main-800x800-1.webp?v=1780941460"},{"product_id":"durobumps-front-premium-off-road-bump-stops-for-1st-gen-sequoia-100-series-land-cruiser","title":"98+ Land Cruiser \u0026 Lexus LX, 00-06 Tundra, 2001+ Sequoia DuroBumps Front Bump Stops [DBF17T]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBF17T replaces the front bump stops on the 1998+ Land Cruiser and Lexus LX, 2000–2006 Tundra, and 2001+ Sequoia with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eThe DBF17T replaces the rear-mounted OEM bump stops on the front driver and passenger sides. Fits stock height through 3\" of lift and will not limit your wheel up-travel — slightly taller than OEM so it compresses under load and deadens the impact just before the ultimate stop.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo loss of up-travel\u003c\/strong\u003e — slightly taller than OEM, so it cushions before the ultimate stop without limiting wheel travel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50091863474399,"sku":"DBF17T","price":205.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/DBF17T-Main-800x800-1.webp?v=1780941477"},{"product_id":"durobumps-rear-3-5-bump-stops-for-1st-gen-sequoia-100-series-land-cruiser","title":"80\/100 Series Land Cruiser, Lexus LX \u0026 1st Gen Sequoia DuroBumps Rear Bump Stops (3.5 inch Tall) [DBRLC35]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBRLC35 replaces the rear bump stops on the 1990–2007 80\/100 Series Land Cruiser, 1996–2007 Lexus LX, and 2001–2007 Sequoia with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eThe 3.5\" height is the pick for \u003cstrong\u003estock-height trucks and mild lifts up to 2\"\u003c\/strong\u003e (fully loaded) — it will not limit wheel up-travel. Running 2\"+ of lift? Step up to the 4.25\" DBRLC425.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo loss of up-travel\u003c\/strong\u003e — slightly taller than OEM, so it cushions before the ultimate stop without limiting wheel travel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50091863736543,"sku":"DBRLC35","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/DBRLC35-Main-800x800-1.webp?v=1780941493"},{"product_id":"durobumps-rear-bump-stops-oem-equivalent-22-25-tundra-23-25-sequoia-land-cruiser-300-and-lx600-non-airbag-1-inch-extended-bump-stops-for-24-25-tacoma-land-cruiser-250-gx550","title":"DuroBumps Rear Bump Stops [DBRTOY3] - OEM Height: 22+ Tundra, 23+ Sequoia, LC300, LX600 (Non-Airbag) | 1-Inch Extended: 25+ 4Runner, 24+ Tacoma, LC250, GX550","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBRTOY3 replaces the rear bump stops on the newest Toyota and Lexus platforms with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eAt 3\" tall (2\" x 2.75\" x 3\" each, 44 oz per set), the DBRTOY3 runs \u003cstrong\u003eOEM height\u003c\/strong\u003e on the 22+ Tundra (non-airbag), 23+ Sequoia, Land Cruiser 300, LX600, and 24+ Tacoma with rear leaf pack — and \u003cstrong\u003e1\" extended\u003c\/strong\u003e on the 25+ 4Runner, 24+ Tacoma with 4-link rear, Land Cruiser 250, and GX550. Deflection: 0.75\" at 1,500 lbs. Need a different height? DBRTOY2 is OEM for the 4-link group; DBRTOY4 adds an inch across the board.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50091969282271,"sku":"DBRTOY3","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps-dbrtoy3-4th-gen-toyota-tacoma-land-crusier-250-lexus-gx250-off-road-bump-stops-3.webp?v=1780945711"},{"product_id":"durobumps-rear-bump-stops-1-inch-extended-length-for-22-25-tundra-23-25-sequoia-land-cruiser-300-lx600-non-airbag-2-inch-extended-bump-stops-for-24-2025-tacoma-lc250-gx550","title":"DuroBumps Rear Bump Stops [DBRTOY4] - 1-Inch Extended: 22+ Tundra, 23+ Sequoia, LC300, LX600 (Non-Airbag) | 2-Inch Extended: 25+ 4Runner, 24+ Tacoma, LC250, GX550","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBRTOY4 replaces the rear bump stops on the newest Toyota and Lexus platforms with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eAt 4\" tall (2\" x 2.75\" x 4\" each, 50 oz per set), the DBRTOY4 runs \u003cstrong\u003e1\" extended\u003c\/strong\u003e on the 22+ Tundra (non-airbag), 23+ Sequoia, Land Cruiser 300, LX600, and 24+ Tacoma with rear leaf pack — and \u003cstrong\u003e2\" extended\u003c\/strong\u003e on the 25+ 4Runner, 24+ Tacoma with 4-link rear, Land Cruiser 250, and GX550 (2\" of lift required). Deflection: 0.75\" at 1,500 lbs. Running less lift? Step down to DBRTOY3 or DBRTOY2.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50091970167007,"sku":"DBRTOY4","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps-dbrtoy4-4th-gen-toyota-tacoma-land-crusier-250-lexus-gx250-off-road-bump-stops-1-1024x1024-1.webp?v=1780945728"},{"product_id":"durobumps-rear-bump-stop-2-inch-extended-length-for-22-25-tundra-non-airbag-oem-equivalent-22-tundra-with-airbags-3-inch-extended-bump-stops-for-24-25-tacoma","title":"DuroBumps Rear Bump Stops [DBRTOY5] - OEM Height: 22+ Tundra w\/ Airbags | 2-Inch Extended: 22+ Tundra (Non-Airbag) | 3-Inch Extended: 24+ Tacoma","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBRTOY5 replaces the rear bump stops on the 2022+ Tundra and 2024+ Tacoma with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eThe tallest of the DBRTOY line, the DBRTOY5 runs \u003cstrong\u003eOEM height\u003c\/strong\u003e on the 22+ Tundra with airbags (including TRD Premium Off-Road), \u003cstrong\u003e2\" extended\u003c\/strong\u003e on the 22+ Tundra without airbags, and \u003cstrong\u003e3\" extended\u003c\/strong\u003e on the 24+ Tacoma. Extended fitments require matching lift. Running less? Step down to DBRTOY4, DBRTOY3, or DBRTOY2.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50091971182815,"sku":"DBRTOY5","price":254.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps-dbrtoy5-4th-gen-toyota-tacoma-land-crusier-250-lexus-gx250-off-road-bump-stops-2-1024x1024-1.webp?v=1780945745"},{"product_id":"durobumps-rear-bump-stops-oem-equivalent-for-24-25-tacoma-land-cruiser-250-lexus-gx550-2-inches-tall-no-lift-required","title":"DuroBumps Rear Bump Stops [DBRTOY2] - OEM Height: 25+ 4Runner, 24+ Tacoma, LC250, GX550 (No Lift Required)","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBRTOY2 replaces the rear bump stops on the newest Toyota and Lexus platforms with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eAt 2\" tall (2\" x 2.75\" x 2\" each, 41 oz per set), the DBRTOY2 is the \u003cstrong\u003eOEM-height\u003c\/strong\u003e direct upgrade for the 25+ 4Runner, 24+ Tacoma with 4-link rear, Land Cruiser 250, and GX550 — no lift required. Deflection: 0.75\" at 1,500 lbs. Lifted? Step up to DBRTOY3 (+1\") or DBRTOY4 (+2\").\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50091971969247,"sku":"DBRTOY2","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/DuroBumps-dbrtoy2-bump-stops-for-4th-gen-toyota-tacoma-land-cruiser-250-and-Lexus-GX250-3-1024x1024-1.webp?v=1780945761"},{"product_id":"fj-cruiser-gx470-gx460-durobumps-3-inch-extended-rear-bump-stops-5-25","title":"2007-2014 FJ Cruiser, 2003-2009 GX470 \u0026 2010-2023 GX460 DuroBumps 3-Inch Extended Rear Bump Stops (5.25 inch Tall) [DBR525LT]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBR525LT replaces the rear bump stops on the 2007–2014 FJ Cruiser and 2003–2023 Lexus GX470\/GX460 with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eThe DBR525LT is \u003cstrong\u003e3\" taller than the OEM bump stop\u003c\/strong\u003e and is designed for trucks running \u003cstrong\u003ea minimum of 3\" of lift\u003c\/strong\u003e. It will limit wheel up-travel by 3\" — that’s the point: it stops the suspension before extended-travel shocks bottom out and protects them from over-compression.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50567275020511,"sku":"DBR525LT","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps-suspension-default-title-3-inch-extended-rear-bump-stops-for-03-23-4runner-07-14-fj-cruiser-03-09-gx470-10-23-gx460-5-25-inch-tall-3-inch-lift-required-durobumps-42616313282.jpg?v=1783976122"},{"product_id":"80-series-land-cruiser-lx450-durobumps-extended-front-bump-stops-4-25","title":"1990-1997 80 Series Land Cruiser \u0026 Lexus LX450 DuroBumps Extended Front Off-Road Bump Stops (4.25-inch Tall) [DBF425525]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBF425525 replaces the front bump stops on the 1990–1997 80 Series Land Cruiser and Lexus LX450 with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eAt \u003cstrong\u003e2\" taller than the OEM bump stops\u003c\/strong\u003e, these frame-mounted extended fronts are built for lifted rigs: they reduce tire rub at full compression and protect extended-length shocks from bottoming out.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50567275053279,"sku":"DBF425525","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps-suspension-default-title-premium-extended-front-off-road-bump-stops-for-90-97-landcruiser-80-series-96-97-lexus-lx450-4-25-inch-tall-2-inch-plus-lift-required-durobumps-4261.jpg?v=1783976124"},{"product_id":"80-series-land-cruiser-lx450-durobumps-front-bump-stops-3-5","title":"1990-1997 80 Series Land Cruiser \u0026 Lexus LX450 DuroBumps Front Bump Stops (3.5-inch Tall) [DBF35425]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBF35425 replaces the front bump stops on the 1990–1997 80 Series Land Cruiser and Lexus LX450 with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eSlightly taller than OEM so it can compress under load and cushion the hit before the ultimate stop, the DBF35425 works at \u003cstrong\u003estock height and mild lifts\u003c\/strong\u003e and won’t limit your wheel up-travel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo loss of up-travel\u003c\/strong\u003e — slightly taller than OEM so it can compress and cushion before the ultimate stop, without limiting wheel travel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50567275086047,"sku":"DBF35425","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps-suspension-default-title-premium-front-off-road-bump-stops-for-90-97-landcruiser-80-series-96-97-lexus-lx450-3-5-inch-tall-no-lift-required-durobumps-42616309416258.jpg?v=1783976126"},{"product_id":"00-21-tundra-durobumps-rear-bump-stops-3-5-inch-height","title":"2000-2021 Tundra DuroBumps Rear Bump Stops (3.5 Inch Height) [DBR35TU]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBR35TU replaces the rear bump stops on the 2000–2021 1st and 2nd Gen Tundra with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eThe DBR35TU installs under the U-bolts in the same location as the OEM stops and is intended for \u003cstrong\u003estock-height trucks and mild lifts up to 2\"\u003c\/strong\u003e (fully loaded). Slightly taller than OEM so it compresses under load, it won’t limit wheel up-travel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo loss of up-travel\u003c\/strong\u003e — slightly taller than OEM so it can compress and cushion before the ultimate stop, without limiting wheel travel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50567275118815,"sku":"DBR35TU","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps-suspension-default-title-toyota-tacoma-tundra-rear-bump-stops-for-05-22-tacoma-00-21-tundra-durobumps-3-5-inch-height-42616311546178.jpg?v=1783976128"},{"product_id":"80-series-land-cruiser-lx450-durobumps-3-inch-extended-rear-bump-stops-5-25","title":"1990-1997 80 Series Land Cruiser \u0026 Lexus LX450 DuroBumps 3-Inch Extended Rear Bump Stops (5.25 inch Tall) [DBRLC525]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBRLC525 replaces the rear bump stops on the 1990–1997 80 Series Land Cruiser and Lexus LX450 with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eThe DBRLC525 is \u003cstrong\u003e3\" taller than the OEM bump stop\u003c\/strong\u003e and is designed for trucks running \u003cstrong\u003ea minimum of 3\" of lift\u003c\/strong\u003e. It will limit wheel up-travel by 3\" — that’s the point: it stops the suspension before extended-travel shocks bottom out and protects them from over-compression.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50567275151583,"sku":"DBRLC525","price":279.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps-suspension-default-title-premium-rear-off-road-3-inch-extended-bump-stops-for-90-96-land-cruiser-96-97-lexus-lx450-5-25-inch-tall-3-inch-lift-required-durobumps-426163144952.jpg?v=1783976130"},{"product_id":"toyota-pickup-front-bump-stops-0-3-inch-for-89-95-pickups-no-lift-required-durobumps","title":"1989-1995 Toyota Pickup DuroBumps Front Bump Stops 0-3 Inch - No Lift Required [DBF24RPU]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBF24RPU replaces the front bump stops on the 1989–1995 Toyota Pickup with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eThe DBF24RPU replaces the rear-mounted OEM bump stop on the front driver and passenger sides, fits \u003cstrong\u003estock height through 3\" of lift with no lift required\u003c\/strong\u003e, and is the only aftermarket bump stop built with the \u003cstrong\u003e14° taper\u003c\/strong\u003e needed for even contact on these lower-control-arm-mounted stops. This Pickup-specific kit includes the required nut and bolt for 1989–1995 trucks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo loss of up-travel\u003c\/strong\u003e — slightly taller than OEM so it can compress and cushion before the ultimate stop, without limiting wheel travel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50567275217119,"sku":"DBF24RPU","price":205.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps-suspension-default-title-toyota-pickup-front-bump-stops-0-3-inch-for-89-95-pickups-no-lift-required-durobumps-42616309285186.jpg?v=1783976133"},{"product_id":"2024-4th-gen-tacoma-front-weld-on-bump-stop","title":"2024+ 4th Gen Tacoma Front Weld-On Bump Stop","description":"\u003cp\u003eBump stops are only for use with TOTAL CHAOS PT# 86524-E stock length lower control arms that feature a bump stop contact pad integrated into the arm. Designed to exclusively to use a DuroBumps rubber bump stop. The bump stop and shock are timed to fully compress simultaneously when the coil over shock bottoms out.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRedundent bump stop system designed to replicate all previous generation Toyota suspensions as well as the LC 250 \u0026amp; 6th Gen 4Runner chassis design.\u003c\/li\u003e\n\u003cli\u003e86524-BUMP-FAB\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569664594143,"sku":"86524-E-BUMP","price":469.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/86524-E-BUMP.jpg?v=1784059989"},{"product_id":"2003-2009-gx470-weld-on-bump-stop-mount-kit","title":"2003-2009 GX470 Weld-on Bump Stop Mount Kit","description":"\u003cp\u003eImprove rear suspension performance and reduce harsh bottom-outs with this weld-on rear bump stop mounting kit, ideal for SUVs carrying added rear weight. The CNC laser-cut brackets weld directly to the outer frame rail and provide easy access to adjust nitrogen pressure, eliminating the need to remove the rear coil spring like other designs. This kit is designed for use with KING 2.0\" compact threaded adjustable bump stops (sold separately), which allow you to fine-tune nitrogen pressure to match your specific off-road needs and terrain. It helps minimize rear-end \"bucking\" and harsh impacts, replacing the limitations of factory rubber bump stops.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces rear-end \"bucking\" and harsh bottom-outs with heavy rear loads.\u003c\/li\u003e\n\u003cli\u003eCNC laser-cut brackets for durability and precise fitment.\u003c\/li\u003e\n\u003cli\u003eAllows easy nitrogen pressure adjustments without removing the rear coil spring.\u003c\/li\u003e\n\u003cli\u003eCompatible with KING 2.0\" compact threaded adjustable bump stops.\u003c\/li\u003e\n\u003cli\u003eCutting, welding, and basic fabrication required for installation.\u003c\/li\u003e\n\u003cli\u003eWeld-On Bump Stop Mounting Kit Fabrication Parts – QTY: 8\u003c\/li\u003e\n\u003cli\u003eReservoir Tabs – QTY: 4\u003c\/li\u003e\n\u003cli\u003eHose Clamps – QTY: 4\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569669968095,"sku":"48624K","price":299.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/48624K_3e5bea13-cc3b-43ba-887b-7802f0dd8c7d.jpg?v=1784060127"},{"product_id":"2010-2023-gx460-weld-on-bump-stop-mount-kit","title":"2010-2023 GX460 Weld-on Bump Stop Mount Kit","description":"\u003cp\u003eIncrease rear suspension dampening control and reduce harsh bottom outs with added weight packed in the rear of the SUV. CNC laser cut brackets weld to the outer frame rail and offer easy access to adjust the nitrogen pressure.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to work with KING 2.0\" compact threaded adjustable bump stops and adjuster nuts.\u003c\/li\u003e\n\u003cli\u003eNOT INCLUDED in kit: QTY (2) KING PT#BS2120\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569671278815,"sku":"48624K","price":299.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/48624K_ccdfa929-a889-4926-9984-46ed5aa34b52.jpg?v=1784060178"},{"product_id":"2007-2009-fj-cruiser-weld-on-bump-stop-mounts","title":"2007-2009 FJ Cruiser Weld-on Bump Stop Mounts","description":"\u003cp\u003eIncrease rear suspension dampening control and reduce harsh bottom outs with added weight packed in the rear of the SUV. CNC laser cut brackets weld to the outer frame rail and offer easy access to adjust the nitrogen pressure.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to work with KING 2.0\" compact threaded adjustable bump stops and adjuster nuts.\u003c\/li\u003e\n\u003cli\u003eNOT INCLUDED in kit: QTY (2) KING PT#BS2120\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569674916063,"sku":"48624K","price":299.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/48624K_1e0657a3-9d2b-4fb3-a54a-7bcecc4ac633.jpg?v=1784060312"},{"product_id":"2010-2014-fj-cruiser-weld-on-bump-stop-mounts","title":"2010-2014 FJ Cruiser Weld-on Bump Stop Mounts","description":"\u003cp\u003eIncrease rear suspension dampening control and reduce harsh bottom outs with added weight packed in the rear of the SUV. CNC laser cut brackets weld to the outer frame rail and offer easy access to adjust the nitrogen pressure.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to work with KING 2.0\" compact threaded adjustable bump stops and adjuster nuts.\u003c\/li\u003e\n\u003cli\u003eNOT INCLUDED in kit: QTY (2) KING PT#BS2120\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569677897951,"sku":"48624K","price":299.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/48624K_07934015-bb12-4c1f-8769-4e6efc1dd5f5.jpg?v=1784060380"},{"product_id":"2007-2021-2nd-gen-tundra-rear-bumpstop-mount-kit","title":"2007-2021 2nd Gen Tundra Rear Bumpstop Mount Kit","description":"\u003cp\u003eEliminates the factory rubber bump stops that are harsh on bottom outs. Designed to work with a KING 2.0\" stubby adjustable bump stops.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNOT INCLUDED: QTY (2) KING PT#BS2120 King 2.0\" compact threaded bump stops and adjuster nuts.\u003c\/li\u003e\n\u003cli\u003eHARDWARE KIT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569682157791,"sku":"48723K","price":543.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/48723K.jpg?v=1784060481"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/collections\/DuroBumps-dbrtoy2-bump-stops-for-4th-gen-toyota-tacoma-land-cruiser-250-and-Lexus-GX250-3-1024x1024-1.webp?v=1781018094","url":"https:\/\/yotamafia.com\/collections\/bump-stops.oembed?page=3","provider":"Yota Mafia","version":"1.0","type":"link"}