{"title":"1st Gen Tundra Suspension","description":"\u003cp\u003eDial in your 1st Gen Tundra (2000–2006) with coilovers, shocks, springs, control arms, and sway bars from Old Man Emu, Bilstein, and Fox. Platform-matched suspension for trail control and daily comfort — every setup fit-checked for your 1st Gen Tundra.\u003c\/p\u003e","products":[{"product_id":"1st-gen-toyota-tacoma-front-diff-bracket-bushings","title":"DuroBumps Front Differential Bushings Kit - 96-02 4Runner, 96-04 Tacoma, 00-06 Tundra, 00-07 Sequoia [DBBUS1]","description":"\u003cp\u003eOn a 20-plus-year-old truck, the rubber goes first — and when the front differential bracket bushings wear out on your 96-02 4Runner, 96-04 Tacoma, 00-06 Tundra, or 00-07 Sequoia, the diff moves under load, CV angles wander, and driveline vibration works into the cab. Until DuroBumps, the only fix was a $300+ replacement bracket. The DBBUS1 kit is the \u003cstrong\u003eonly aftermarket replacement bushing\u003c\/strong\u003e for these front diff mounting brackets.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect rubber replacement\u003c\/strong\u003e for the worn OEM bushings — solid construction built to last\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintains CV geometry\u003c\/strong\u003e — eliminates diff movement under load while 4-wheeling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduces road vibration\u003c\/strong\u003e into the cab\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy install\u003c\/strong\u003e with minimal tools — far cheaper than a new bracket\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50089663430879,"sku":"DBBUS1","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/Toyota-Tacoma-Diff-Bracket-Bushings-1-scaled-2.jpg?v=1780921271"},{"product_id":"spc-upper-control-arms-2000-2006-1st-gen-tundra","title":"SPC Upper Control Arms (2000-2006 1st Gen Tundra)","description":"\u003ch3\u003eSPC Upper Control Arms (2000-2006 1st Gen Tundra)\u003c\/h3\u003e\u003cbr\u003eImprove droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC’s adjustable front upper control arms. Featuring an upgraded greaseable ball joint and SpecRide™ bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's integrated tubular and cast steel designs provide the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs.\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eGet more droop travel: SPC’s arm has improved clearance to get around the spring bucket. With 80° of articulation in the upgraded ball joint and free pivoting bushings, SPC's arm gives you maximum droop travel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eGet your drivability and tracking back: When you lift your truck you affect caster and camber. SPC’s arms have +1° of caster built into them. Using its patented ball joint design the arm will get you 0° to +4° of caster and ±2° of camber, so you can put your alignment angles back to specification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eGet your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSold as a pair complete with bushings and ball joints.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPC","offers":[{"title":"Default Title","offer_id":50090809032927,"sku":"25485","price":895.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/spc_upper_control_arms_2000_2006_toyota_tundra.jpg?v=1780928354"},{"product_id":"tc-joint-tubular-upper-control-arms-2000-2006-1st-gen-tundra","title":"Total Chaos Joint Tubular Upper Control Arms (2000-2006 1st Gen Tundra)","description":"\u003ch3\u003eIcon Delta Joint Tubular Upper Control Arms (2000-2006 1st Gen Tundra)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTC upper control arms combined with extended length coil over shocks will allow for up to 1” of additional wheel travel.\u003c\/li\u003e\n\u003cli\u003eDesigned to maintain factory alignment specs on vehicles with 1.5\"-3\" lift kits.\u003c\/li\u003e\n\u003cli\u003e4130 Chromoly tubular upper control arms are 100% bolt-on and handcrafted in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e1\" I.D. uniballs feature a heat-treated stainless-steel ball \u0026amp; heat-treated stainless-steel race for maximum corrosion resistance and component longevity. These uniballs also feature a military-grade PTFE woven fabric liner that helps prevent noise and reduce maintenance.\u003c\/li\u003e\n\u003cli\u003eCNC machined slug adapters press into the spindle and convert the factory ball joint to a 1\" uniball for added strength and wheel travel\u003c\/li\u003e\n\u003cli\u003eCustom profile upper and lower hi-misalignment spacers are machined from 17-4 stainless-steel to maximize strength and wheel travel.\u003c\/li\u003e\n\u003cli\u003eUrethane bushings reduce deflection compared to stock rubber bushings.\u003c\/li\u003e\n\u003cli\u003eControl arm pivots include zerk fittings to grease the bushings and inner sleeves without disassembly.\u003c\/li\u003e\n\u003cli\u003e3 stage powder coat process includes a durable clear coat to provide a long-lasting finish.\u003c\/li\u003e\n\u003cli\u003eComplete grade 8 hardware kit is included.\u003c\/li\u003e\n\u003cli\u003e* Not compatible with Tuff Country lift kit.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50090812375263,"sku":null,"price":1050.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/icon_delta_joint_tubular_upper_control_arms_2000_2006_toyota_tundra.jpg?v=1780928404"},{"product_id":"old-man-emu-nitrocharger-plus-shocks-ome-63091","title":"Old Man Emu Nitrocharger Plus Shocks | OME-63091","description":"\u003cp\u003eThe Nitrocharger Plus shock is one of the most advanced shock absorbers on the market. Designed by the OME ride control engineers and tested through the extensive vehicle specific development program, the Nitrocharger Plus Shock absorbers will give you the best control, durability and comfortable ride on and off road.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThese Nitrocharger Plus shocks offer exceptional ride quality on and off road.\u003c\/li\u003e\n\u003cli\u003eRear shocks for 05+ Tacoma, 00-06 Tundra\u003c\/li\u003e\n\u003cli\u003eRecommended for use with OME rear coils.\u003c\/li\u003e\n\u003cli\u003eNitrogen gas charged.\u003c\/li\u003e\n\u003cli\u003ePriced per pair.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Old Man Emu","offers":[{"title":"Default Title","offer_id":50090825056479,"sku":"OME-63091","price":254.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/OME60073-copy_cf61fefc-e2cb-4710-ad1d-317bdf4851d4.jpg?v=1780928645"},{"product_id":"durobumps-front-premium-off-road-bump-stops-for-1st-gen-sequoia-100-series-land-cruiser","title":"98+ Land Cruiser \u0026 Lexus LX, 00-06 Tundra, 2001+ Sequoia DuroBumps Front Bump Stops [DBF17T]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBF17T replaces the front bump stops on the 1998+ Land Cruiser and Lexus LX, 2000–2006 Tundra, and 2001+ Sequoia with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eThe DBF17T replaces the rear-mounted OEM bump stops on the front driver and passenger sides. Fits stock height through 3\" of lift and will not limit your wheel up-travel — slightly taller than OEM so it compresses under load and deadens the impact just before the ultimate stop.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo loss of up-travel\u003c\/strong\u003e — slightly taller than OEM, so it cushions before the ultimate stop without limiting wheel travel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50091863474399,"sku":"DBF17T","price":205.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/DBF17T-Main-800x800-1.webp?v=1780941477"},{"product_id":"00-21-tundra-durobumps-rear-bump-stops-3-5-inch-height","title":"2000-2021 Tundra DuroBumps Rear Bump Stops (3.5 Inch Height) [DBR35TU]","description":"\u003cp\u003eFactory bump stops are basically hockey pucks — rock hard the instant the suspension touches them. DuroBumps DBR35TU replaces the rear bump stops on the 2000–2021 1st and 2nd Gen Tundra with dual-durometer rubber that engages softly and stiffens progressively, killing the shell-shock hit when you bottom out and keeping the truck composed on hard hits.\u003c\/p\u003e\u003cp\u003eThe DBR35TU installs under the U-bolts in the same location as the OEM stops and is intended for \u003cstrong\u003estock-height trucks and mild lifts up to 2\"\u003c\/strong\u003e (fully loaded). Slightly taller than OEM so it compresses under load, it won’t limit wheel up-travel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-durometer rubber\u003c\/strong\u003e — soft initial contact that ramps up progressively, acting like a secondary spring instead of a wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts in the OEM location\u003c\/strong\u003e — bolts in with no modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends suspension life\u003c\/strong\u003e — absorbs bottom-out loads that would otherwise hammer your shocks and mounts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProudly made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo loss of up-travel\u003c\/strong\u003e — slightly taller than OEM so it can compress and cushion before the ultimate stop, without limiting wheel travel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50567275118815,"sku":"DBR35TU","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps-suspension-default-title-toyota-tacoma-tundra-rear-bump-stops-for-05-22-tacoma-00-21-tundra-durobumps-3-5-inch-height-42616311546178.jpg?v=1783976128"},{"product_id":"tacoma-tundra-durobumps-7-75-inch-u-bolt-flip-kit","title":"2005-2023 Tacoma \u0026 2000-2006 Tundra DuroBumps 7.75 Inch U-Bolt Flip Kit [DBFK01]","description":"\u003cp\u003eToyota trucks leave the factory with the U-bolt threads under the rear axle, pointing at the ground — the first thing to catch on a rock and the first thing to get damaged. The DuroBumps U-Bolt Flip Kit (DBFK01) for the 2005–2023 2nd\/3rd Gen Tacoma and 2000–2006 1st Gen Tundra flips the configuration: heavy-duty \u003cstrong\u003e9\/16\" diameter, 7.75\"-long U-bolts\u003c\/strong\u003e saddle the axle tube with the threads pointing up, paired with a \u003cstrong\u003e3\/8\" thick steel flip plate\u003c\/strong\u003e that mounts the axle to the leaf pack from above and shields the threads.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplaces the light-gauge OEM U-bolts and flimsy factory mounting plates\u003c\/li\u003e\n\u003cli\u003eThreads up = more under-axle clearance and nothing to hang up on rocks\u003c\/li\u003e\n\u003cli\u003eFlip plates powder-coated black; U-bolts clear-zinc coated and powder-coated black\u003c\/li\u003e\n\u003cli\u003eProudly made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durobumps","offers":[{"title":"Default Title","offer_id":50567275184351,"sku":"DBFK01-775","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/durobumps-suspension-default-title-toyota-u-bolt-flip-kit-05-23-tacoma-00-06-tundra-7-75-inch-length-u-bolts-durobumps-42616309907778.jpg?v=1783976132"},{"product_id":"00-06-1st-gen-tundra-king-2-5-front-coilovers","title":"2000-2006 Tundra King 2.5 Front Coilovers [25001-138]","description":"\u003cp\u003eKing 2.5\" remote reservoir front coilovers [25001-138] for the 2000-2006 1st Gen Tundra — custom tuned, 100% bolt-on performance with increased wheel travel and adjustable ride height. Each application’s damping curve and spring rate was developed through dyno lab testing and real-world abuse, so the ride is dialed out of the box.\u003c\/p\u003e\u003cp\u003eAvailable in \u003cstrong\u003estandard or extended travel\u003c\/strong\u003e (extended travel requires aftermarket upper control arms).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% bolt-on\u003c\/strong\u003e — no fabrication, installs in the factory locations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge 2.5\" shock bodies\u003c\/strong\u003e — more fluid capacity for smoother, cooler-running shocks under sustained abuse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-specific tuning\u003c\/strong\u003e — damping curves and spring rates developed through dyno lab work and punishing real-world testing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace pedigree\u003c\/strong\u003e — built from the same materials and to the same exacting standards as King’s race shocks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"King Shocks","offers":[{"title":"Standard","offer_id":50568968241375,"sku":"25001-138","price":1466.8,"currency_code":"USD","in_stock":true},{"title":"Extended","offer_id":50568968274143,"sku":"25001-138-EXT","price":1466.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/M198654043.png?v=1784036683"},{"product_id":"2004-2006-3-5-inch-long-travel-kit-with-coilovers-1st-gen-tundra","title":"2004-2006 1st Gen Tundra Total Chaos +3.5 Long Travel Kit w\/ King Coilovers","description":"\u003cp\u003eBolt-on +3.5\" long travel kit for the 2004-2006 1st Gen Toyota Tundra. Upper and lower control arms extend track width 3.5\" per side and bolt to the factory mounting locations for 12.5\" of front wheel travel with 4WD.\u003c\/p\u003e\n\n\u003cp\u003eLower arms are internally gusseted, fully boxed, and include dual shock tabs so an optional TC external bypass shock can be added for more damping control. Urethane bushings reduce deflection versus stock rubber for a tighter off-road feel, and adjustable limit strap clevises let you correct droop as straps stretch over time.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes King 2.5\" front long travel coilovers with remote reservoirs and 700 lb springs (pair)\u003c\/li\u003e\n\u003cli\u003eUpper and lower control arms extended 3.5\" per side\u003c\/li\u003e\n\u003cli\u003e12.5\" of front wheel travel with 4WD\u003c\/li\u003e\n\u003cli\u003e1\" I.D. uniballs with heat-treated stainless steel ball and race, military-grade PTFE woven liner\u003c\/li\u003e\n\u003cli\u003eInternally gusseted, fully boxed lower arms with dual shock tabs\u003c\/li\u003e\n\u003cli\u003eUrethane bushings with zerk fittings on all pivots\u003c\/li\u003e\n\u003cli\u003eTC 17-4 stainless hi-misalignment spacers\u003c\/li\u003e\n\u003cli\u003eDOT-approved stainless steel braided brake lines and Grade 8 hardware\u003c\/li\u003e\n\u003cli\u003e3-stage powder coat with clear coat finish, hand crafted in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDoes not include TC custom 4WD extended axles required to retain 4WD (PN 97300, sold separately)\u003c\/li\u003e\n\u003cli\u003eFiberglass fenders required\u003c\/li\u003e\n\u003cli\u003eUses TC-specific 2.5\" long travel coilovers that bolt to the factory coil bucket; extended-travel shocks are too short and will not work\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569658859743,"sku":"TUNDRA-04-LT-K1A","price":5107.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/TUNDRA-04-LT-K1A.jpg?v=1784059865"},{"product_id":"2000-2003-3-5-inch-long-travel-kit-with-coilovers-1st-gen-tundra","title":"2000-2003 1st Gen Tundra Total Chaos +3.5 Long Travel Kit w\/ King Coilovers","description":"\u003cp\u003eBolt-on +3.5\" long travel kit for the 2000-2003 1st Gen Toyota Tundra. Upper and lower control arms extend track width 3.5\" per side and bolt to the factory mounting locations for 12.5\" of front wheel travel with 4WD.\u003c\/p\u003e\n\n\u003cp\u003eLower arms are internally gusseted, fully boxed, and include dual shock tabs so an optional TC external bypass shock can be added for more damping control. Urethane bushings reduce deflection versus stock rubber for a tighter off-road feel, and adjustable limit strap clevises let you correct droop as straps stretch over time.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes King 2.5\" front long travel coilovers with remote reservoirs and 700 lb springs (pair)\u003c\/li\u003e\n\u003cli\u003eUpper and lower control arms extended 3.5\" per side\u003c\/li\u003e\n\u003cli\u003e12.5\" of front wheel travel with 4WD\u003c\/li\u003e\n\u003cli\u003e1\" I.D. uniballs with heat-treated stainless steel ball and race, military-grade PTFE woven liner\u003c\/li\u003e\n\u003cli\u003eInternally gusseted, fully boxed lower arms with dual shock tabs\u003c\/li\u003e\n\u003cli\u003eUrethane bushings with zerk fittings on all pivots\u003c\/li\u003e\n\u003cli\u003eTC 17-4 stainless hi-misalignment spacers\u003c\/li\u003e\n\u003cli\u003eDOT-approved stainless steel braided brake lines and Grade 8 hardware\u003c\/li\u003e\n\u003cli\u003e3-stage powder coat with clear coat finish, hand crafted in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDoes not include TC custom 4WD extended axles required to retain 4WD (PN 97300, sold separately)\u003c\/li\u003e\n\u003cli\u003eFiberglass fenders required\u003c\/li\u003e\n\u003cli\u003eUses TC-specific 2.5\" long travel coilovers that bolt to the factory coil bucket; extended-travel shocks are too short and will not work\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569658892511,"sku":"TUNDRA-00-LT-K1A","price":5107.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/TUNDRA-00-LT-K1A.jpg?v=1784059870"},{"product_id":"2000-2006-1st-gen-tundra-lowering-shackles","title":"2000-2006 1st Gen Tundra Lowering Shackles","description":"\u003cp\u003eUpgrade your rear suspension with this Rear Lowering Shackle Kit, designed to lower the rear suspension by 3\/4\" while improving handling and stability. Compatible with stock or aftermarket leaf springs, this kit is essential for under-axle leaf spring conversions. Engineered for durability and ease of installation, this kit includes urethane bushings, inner sleeves, and zerk fittings for simple maintenance. Improves Handling: Lowers rear suspension by 3\/4\", enhancing overall handling and performance.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproves Handling: Lowers rear suspension by 3\/4\", enhancing overall handling and performance.\u003c\/li\u003e\n\u003cli\u003eVersatile Compatibility: Works with stock or aftermarket leaf springs.\u003c\/li\u003e\n\u003cli\u003eUnder-Axle Ready: Required for under-axle leaf spring conversions.\u003c\/li\u003e\n\u003cli\u003eDurable Construction: Includes urethane bushings and inner sleeves for long-lasting performance.\u003c\/li\u003e\n\u003cli\u003eEasy Installation: 100% bolt-on for quick and hassle-free setup.\u003c\/li\u003e\n\u003cli\u003e(2) Rear Lowering Shackles\u003c\/li\u003e\n\u003cli\u003e(4) Bushing Halves\u003c\/li\u003e\n\u003cli\u003e(2) Inner Sleeves\u003c\/li\u003e\n\u003cli\u003e(2) Zerk Fittings\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569679110367,"sku":"49702","price":266.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/49702.jpg?v=1784060434"},{"product_id":"2004-2006-1st-gen-tundra-3-5-long-travel-kit","title":"2004-2006 1st Gen Tundra 3.5 Long Travel Kit","description":"\u003cp\u003eUpper and lower control arms are extended to increase the track width 3.5\" per side and bolt to the factory control arm mounting locations. 12.5\" of wheel travel with 4WD.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUpper ball joints are upgraded to 1\" uniballs for additional strength and wheel travel.\u003c\/li\u003e\n\u003cli\u003eTOTAL CHAOS 1\" I.D. uniballs feature a heat treated stainless steel ball \u0026amp; race for superior corrosion resistance and component strength. A military grade PTFE woven fabric liner surrounds the uniball which helps prevent noise.\u003c\/li\u003e\n\u003cli\u003eUpper and lower control arms utilize urethane bushings which greatly reduce bushing deflection compared to stock rubber bushings. Providing a tighter off road feel and trail handling. All pivots include zerk fittings for easy lubrication maintenance.\u003c\/li\u003e\n\u003cli\u003eInstall extended axles to retain 4WD (PN: 97300) - SOLD SEPARATELY\u003c\/li\u003e\n\u003cli\u003e3 stage powder coat process includes a durable clear coat to provide a long lasting finish.\u003c\/li\u003e\n\u003cli\u003eTC specific 2.5\" long travel coil over shocks bolt to the factory coil bucket location.\u003c\/li\u003e\n\u003cli\u003eNOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569681109215,"sku":"97004BK","price":3582.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/97004BK.jpg?v=1784060436"},{"product_id":"2000-2003-1st-gen-tundra-3-5-long-travel-kit","title":"2000-2003 1st Gen Tundra 3.5 Long Travel Kit","description":"\u003cp\u003eUpgrade your suspension system with the 3.5\" Extended Long Travel Suspension Kit, designed to enhance off-road performance and durability. This kit increases the track width by 3.5\" per side and bolts directly to factory control arm mounting locations. Engineered for 12.5\" of wheel travel with 4WD, this long travel kit features robust upper and lower control arms, upgraded uniballs, and secondary shock compatibility to maximize tunability and vehicle performance. Ideal for challenging terrains and heavy vehicle setups, this kit ensures superior handling, strength, and ride quality. Extended Track Width: Increases track width by 3.5\" per side for improved stability.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExtended Track Width: Increases track width by 3.5\" per side for improved stability.\u003c\/li\u003e\n\u003cli\u003e12.5\" of Wheel Travel: Achieves exceptional articulation with extended 4WD compatibility.\u003c\/li\u003e\n\u003cli\u003eUpgraded Uniballs: 1\" TOTAL CHAOS I.D. uniballs with heat-treated stainless steel construction and PTFE liners for durability and noise reduction.\u003c\/li\u003e\n\u003cli\u003eUrethane Bushings: Reduces deflection compared to rubber bushings for tighter off-road handling.\u003c\/li\u003e\n\u003cli\u003eReinforced Lower Control Arms: Fully boxed and internally gusseted with dual shock tabs for secondary shock compatibility.\u003c\/li\u003e\n\u003cli\u003eLimit Strap Clevises: Adjustable clevises to properly limit droop wheel travel and accommodate strap stretch over time.\u003c\/li\u003e\n\u003cli\u003eReady for 2.5\" Coil Over Shocks: Designed to work with TC-specific long travel coil over shocks (not compatible with extended travel shocks).\u003c\/li\u003e\n\u003cli\u003eBuilt to Last: Crafted in the U.S.A. with a durable 3-stage powder coat finish for long-term protection.\u003c\/li\u003e\n\u003cli\u003eExtended Axles: Install TC modified extended axles (PN: 97300) to retain 4WD (sold separately).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569681141983,"sku":"97000BK","price":3582.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/97000BK.jpg?v=1784060438"},{"product_id":"2000-2006-1st-gen-tundra-shock-hoop-bypass-package-long-travel","title":"2000-2006 1st Gen Tundra Shock Hoop Bypass Package Long Travel","description":"\u003cp\u003e2000-2006 1st Gen Tundra Shock Hoop Bypass Package Long Travel.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4130 pre-bent chromoly shock hoops for added strength and durability.\u003c\/li\u003e\n\u003cli\u003eAccommodates TC custom-length secondary 2.5\" bypass shocks for maximum dampening control and tunability.\u003c\/li\u003e\n\u003cli\u003eReinforces factory coil bucket while maintaining a low-profile design to avoid inner fender contact.\u003c\/li\u003e\n\u003cli\u003eFlush mount top plate works with shocks using bolt or stud upper mounts, reducing the need for trimming.\u003c\/li\u003e\n\u003cli\u003eGrade 8 hardware included for a secure and reliable installation.\u003c\/li\u003e\n\u003cli\u003eSpecifically designed for TOTAL CHAOS lower control arms with dual shock tabs.\u003c\/li\u003e\n\u003cli\u003e(1) TOTAL CHAOS Dual Shock Hoops (PN: 96601)\u003c\/li\u003e\n\u003cli\u003e(1) Pair of KING 2.5\" Front Bypass Shocks (PN: KNG-TC1151-34)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePre-tacked upper shock tabs simplify setup for proper secondary shock alignment (welding required).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569681174751,"sku":"96601-25-LT","price":2426.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/96601-25-LT_51146081-77cb-49eb-a168-484ae218627b.jpg?v=1784060440"},{"product_id":"2000-2006-1st-gen-tundra-expedition-series-lower-control-arm-bushing-kit","title":"2000-2006 1st Gen Tundra Expedition Series Lower Control Arm Bushing Kit","description":"\u003cp\u003eUrethane bushing service kit for one pair of Total Chaos lower control arms. Refreshes the LCA pivots and restores tight steering feel.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUrethane bushing kit servicing one pair of TC lower control arms\u003c\/li\u003e\n\u003cli\u003eReduces deflection versus stock rubber\u003c\/li\u003e\n\u003cli\u003eSuper Lube included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Total Chaos lower control arms only — not factory LCAs\u003c\/li\u003e\n\u003cli\u003eSteel inner sleeves and outer washers are not included; reuse existing hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569681240287,"sku":"69770-R","price":68.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/69770-R_52e005ca-156e-4c63-aa9f-9552697d211f.jpg?v=1784060443"},{"product_id":"2000-2006-1st-gen-tundra-long-travel-bushing-kit","title":"2000-2006 1st Gen Tundra Long Travel Bushing Kit","description":"\u003cp\u003eUrethane bushing service kit for Total Chaos long travel upper and lower control arms. 16 bushings total — enough to refresh the full pivot set.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 urethane bushings total (mix of halves and full)\u003c\/li\u003e\n\u003cli\u003e(1) Super Lube, 0.5 oz\u003c\/li\u003e\n\u003cli\u003eReduces deflection versus stock rubber\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Total Chaos long travel control arms only — not factory control arms\u003c\/li\u003e\n\u003cli\u003eSteel inner sleeves and UCA outer washers are not included; reuse existing hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569681305823,"sku":"69700","price":146.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/69700_e4c8bf71-1729-49eb-92f9-aebea3cdf31d.jpg?v=1784060444"},{"product_id":"2000-2006-1st-gen-tundra-upper-control-arm-bushing-kit","title":"2000-2006 1st Gen Tundra Upper Control Arm Bushing Kit","description":"\u003cp\u003eUrethane bushing service kit for one pair of Total Chaos upper control arms. Refreshes the UCA pivots without needing to disassemble the rest of the suspension.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(8) urethane bushing halves\u003c\/li\u003e\n\u003cli\u003e(1) Super Lube tube, 1\/2 oz\u003c\/li\u003e\n\u003cli\u003eServices one pair of TC upper control arms\u003c\/li\u003e\n\u003cli\u003eReduces deflection versus stock rubber\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Total Chaos upper control arms only — not factory UCAs\u003c\/li\u003e\n\u003cli\u003eSteel inner sleeves and outer washers are not included; reuse existing hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569681338591,"sku":"69000","price":66.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/69000_843b9f8f-715d-48e8-9eae-3a0bbfbb15d1.jpg?v=1784060446"},{"product_id":"2000-2006-1st-gen-tundra-replacement-uniball-kit","title":"2000-2006 1st Gen Tundra Replacement Uniball Kit","description":"\u003cp\u003eReplacement 1\" I.D. stainless steel uniball kit for Total Chaos upper and lower control arms. Heat-treated stainless ball and race resist corrosion under off-road service, and a military-grade PTFE woven liner reduces noise as the joint wears.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 1\" I.D. stainless steel uniballs\u003c\/li\u003e\n\u003cli\u003e(2) snap rings\u003c\/li\u003e\n\u003cli\u003eHeat-treated stainless steel ball and race\u003c\/li\u003e\n\u003cli\u003eMilitary-grade PTFE woven fabric liner\u003c\/li\u003e\n\u003cli\u003eCompatible with all Total Chaos upper and lower control arms\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569681371359,"sku":"FK-REP-KIT","price":198.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/FK-REP-KIT_d86eeb77-98c7-4ac1-86fd-0489cf995494.jpg?v=1784060448"},{"product_id":"2000-2006-1st-gen-tundra-aluminum-uniball-press-tool","title":"2000-2006 1st Gen Tundra Aluminum Uniball Press Tool","description":"\u003cp\u003eAluminum press tool for installing 1\" uniballs in Total Chaos upper or lower control arms. Works with the arms still on the vehicle.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) large aluminum press cup\u003c\/li\u003e\n\u003cli\u003e(1) small aluminum press cup\u003c\/li\u003e\n\u003cli\u003e(1) 3\/4\" Acme threaded rod\u003c\/li\u003e\n\u003cli\u003e(2) 3\/4\" SAE washers\u003c\/li\u003e\n\u003cli\u003e(2) Acme nuts\u003c\/li\u003e\n\u003cli\u003ePrecision-machined 6061 aluminum\u003c\/li\u003e\n\u003cli\u003e\"TOTAL CHAOS Fabrication\" milled into the large cup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with 1\" uniballs only — not 1.25\" uniballs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569681404127,"sku":"96006-ALU","price":103.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/96006-ALU_10564218-af14-4578-9f22-f7f09594f76e.jpg?v=1784060451"},{"product_id":"2000-2006-1st-gen-tundra-ball-joint-removal-tool","title":"2000-2006 1st Gen Tundra Ball Joint Removal Tool","description":"\u003cp\u003eBall joint removal tool for the factory lower ball joint. Designed for off-vehicle ball joint replacement.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision-machined steel tool body\u003c\/li\u003e\n\u003cli\u003eDesigned for the factory lower ball joint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569681535199,"sku":"96005","price":46.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/96005_ce083b37-ad0b-4d27-a254-076dbc17ce76.jpg?v=1784060453"},{"product_id":"2000-2006-1st-gen-tundra-long-travel-axles","title":"2000-2006 1st Gen Tundra Long Travel Axles","description":"\u003cp\u003e+2 extended axle shafts. Retain 4WD when installing a TC +2\" long travel kit. Reuse factory inner and outer CV joints and boots.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003cli\u003e(2) +2 extended axle shafts, 4340 heat-treated\u003c\/li\u003e\n\u003cli\u003eReuses factory inner and outer CV joints and boots\u003c\/li\u003e\n\u003cli\u003eBoot clamps and c-clips included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for use with OEM Toyota CV joints only; will not fit aftermarket CV joints\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569681567967,"sku":"97300","price":805.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/97300.jpg?v=1784060454"},{"product_id":"2000-2006-1st-gen-tundra-heim-joint-steering-upgrade","title":"2000-2006 1st Gen Tundra Heim Joint Steering Upgrade","description":"\u003cp\u003eUpgrade your steering performance with this Chromoly Heim Joint Tie-Rod Upgrade Kit, designed to eliminate sloppy steering and improve durability in demanding off-road conditions. Engineered to work specifically with Total Chaos 3.5\" extended long travel kits, this upgrade replaces factory tie rods with heavy-duty chromoly components, ensuring reliable handling and control. Enhanced Steering Precision: Replaces outer factory tie rods with 7\/8\" chromoly heim joints for improved strength and steering control.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced Steering Precision: Replaces outer factory tie rods with 7\/8\" chromoly heim joints for improved strength and steering control.\u003c\/li\u003e\n\u003cli\u003eIncreased Strength: Weld-on double shear tabs add reinforcement to the outer tie-rod mounting location.\u003c\/li\u003e\n\u003cli\u003eTailored Fit: Specifically designed for Total Chaos 3.5\" extended long travel kits.\u003c\/li\u003e\n\u003cli\u003eDurable Components: Supplied with Grade 8 hardware for secure installation.\u003c\/li\u003e\n\u003cli\u003eInstallation Requirements: Welding, grinding, and drilling of the lower ball joint hole are necessary.\u003c\/li\u003e\n\u003cli\u003e(2) 7\/8\" Chromoly Heim Joints\u003c\/li\u003e\n\u003cli\u003e(2) Chromoly Tie-Rod Extensions\u003c\/li\u003e\n\u003cli\u003e(2) Weld-On Double Shear Tabs\u003c\/li\u003e\n\u003cli\u003e(4) 17-4 Stainless Steel Hi-Misalignment Spacers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569681600735,"sku":"97099","price":638.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/97099.jpg?v=1784060457"},{"product_id":"2000-2006-1st-gen-tundra-stock-length-heim-joint-steering-conversion","title":"2000-2006 1st Gen Tundra Stock Length Heim Joint Steering Conversion","description":"\u003cp\u003eEnhance steering precision and durability with the Chromoly Heim Steering Upgrade Kit, designed to eliminate sloppy steering while maximizing strength and control. This kit replaces the outer factory tie rods with heavy-duty 7\/8\" chromoly heim joints and heat-treated 17-4 stainless steel hi-misalignment spacers. Ideal for stock width vehicles, it works with factory lower ball joints or the TOTAL CHAOS Lower Uniball Conversion (PN: 96140-H). The chromoly tie-rod extensions are engineered for long-lasting performance, while weld-on double shear tabs reinforce the outer tie-rod mounting location for added durability. Welding and grinding are required for installation, as well as drilling the lower ball joint hole for proper fitment.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproved Steering Control: Eliminates factory tie rod deflection for precise steering.\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty Components: Includes 7\/8\" chromoly heim joints and heat-treated 17-4 stainless steel spacers.\u003c\/li\u003e\n\u003cli\u003eReinforced Design: Weld-on double shear tabs strengthen the tie-rod mounting location.\u003c\/li\u003e\n\u003cli\u003eBuilt for Performance: Designed to work on stock width vehicles with factory ball joints or TC uniball conversions.\u003c\/li\u003e\n\u003cli\u003eGrade 8 Hardware: Ensures secure and reliable installation.\u003c\/li\u003e\n\u003cli\u003eProfessional Installation Required: Welding, grinding, and drilling are necessary for fitment.\u003c\/li\u003e\n\u003cli\u003e(2) 7\/8\" Chromoly Heim Joint\u003c\/li\u003e\n\u003cli\u003e(2) Stock Length Chromoly Tie-Rod Extensions\u003c\/li\u003e\n\u003cli\u003e(2) Weld-On Double Shear Tab\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569681633503,"sku":"97080-OE","price":680.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/97080-OE.jpg?v=1784060458"},{"product_id":"2000-2006-1st-gen-tundra-urethane-rack-bushings","title":"2000-2006 1st Gen Tundra Urethane Rack Bushings","description":"\u003cp\u003eUpgrade your Tundra's steering precision with this Steering Rack Bushing Kit, designed to eliminate rack movement caused by worn-out factory rubber bushings. This kit replaces all three OEM rubber bushings with durable replacements, providing a direct-fit solution that requires no additional fabrication. Improve your vehicle's steering response and handling, whether on-road or off-road, with this comprehensive upgrade. Improved Steering Performance: Eliminates movement caused by worn OEM bushings for precise steering response.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproved Steering Performance: Eliminates movement caused by worn OEM bushings for precise steering response.\u003c\/li\u003e\n\u003cli\u003eComplete Replacement: Includes bushings for all three factory rubber mounting points.\u003c\/li\u003e\n\u003cli\u003eDurable Construction: Designed to withstand the demands of heavy-duty and off-road use.\u003c\/li\u003e\n\u003cli\u003eDirect Fit: No additional fabrication or modifications required for installation.\u003c\/li\u003e\n\u003cli\u003eEasy Maintenance: Includes Super Lube for optimal bushing performance and longevity.\u003c\/li\u003e\n\u003cli\u003e(1) Bushing, Steering Rack \"D\"\u003c\/li\u003e\n\u003cli\u003e(2) Bushings, Tundra Steering Rack Center\u003c\/li\u003e\n\u003cli\u003e(2) Bushings, Tundra Steering Rack Left\u003c\/li\u003e\n\u003cli\u003e(1) Inner Sleeve, Tundra Steering Rack Center (Short)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569681666271,"sku":"97701","price":47.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/97701.jpg?v=1784060460"},{"product_id":"2004-2006-1st-gen-tundra-lower-uniball-conversion-heim-steering","title":"2004-2006 1st Gen Tundra Lower Uniball Conversion Heim Steering","description":"\u003cp\u003eDOES NOT FIT 2000-2003 Tundras. CNC machined AISI 1018 billet steel construction.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLower uniball conversion is designed to upgrade the factory ball joint with added strength and durability.\u003c\/li\u003e\n\u003cli\u003eBuilt in locating pins and registering center ring lock into the spindle and lessen the shear load on the mounting hardware.\u003c\/li\u003e\n\u003cli\u003e100% bolt on and fully rebuildable.\u003c\/li\u003e\n\u003cli\u003eDouble shear tie rod tabs are pre-welded. The tab inner spread is 2.125\".\u003c\/li\u003e\n\u003cli\u003eDesigned for use with the TC heim steering upgrade (PT# 96085-OE or 96099) which utilizes a 7\/8\" heim, 5\/8\" bolt, and misalignment spacers to fit 2.125\" double shear tab spacing.\u003c\/li\u003e\n\u003cli\u003eMounting hardware is included.\u003c\/li\u003e\n\u003cli\u003eNOTE: These lower uniball conversions are designed to be installed on a vehicle with 2\"-3\" of suspension lift. Installing them on a vehicle with more or less lift height may result in alignment issues.\u003c\/li\u003e\n\u003cli\u003eNOT COMPATIBLE WITH MANUAL LOCKING HUBS.\u003c\/li\u003e\n\u003cli\u003eLOWER UNIBALL CONVERSION W\/ TC HEIM STEERING (SOLD SEPARATELY) - LEFT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569681731807,"sku":"97144-H","price":1123.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/97144-H.jpg?v=1784060463"},{"product_id":"2004-2006-1st-gen-tundra-lower-uniball-conversion-oe-tie-rod","title":"2004-2006 1st Gen Tundra Lower Uniball Conversion OE Tie Rod","description":"\u003cp\u003eDOES NOT FIT 2000-2003 Tundras. CNC machined AISI 1018 billet steel construction.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLower uniball conversion is designed to upgrade the factory ball joint with added strength and durability.\u003c\/li\u003e\n\u003cli\u003eBuilt in locating pins and registering center ring lock into the spindle and lessen the shear load on the mounting hardware.\u003c\/li\u003e\n\u003cli\u003e100% bolt on and fully rebuildable.\u003c\/li\u003e\n\u003cli\u003eMounting hardware is included.\u003c\/li\u003e\n\u003cli\u003eNOTE: These lower uniball conversions are designed to be installed on a vehicle with 2\"-3\" of suspension lift. Installing them on a vehicle with more or less lift height may result in alignment issues.\u003c\/li\u003e\n\u003cli\u003eNOT COMPATIBLE WITH MANUAL LOCKING HUBS.\u003c\/li\u003e\n\u003cli\u003eLOWER UNIBALL CONVERSION W\/ OE TIE ROD STEERING - LEFT\u003c\/li\u003e\n\u003cli\u003eLOWER UNIBALL CONVERSION W\/ OE TIE ROD STEERING - RIGHT\u003c\/li\u003e\n\u003cli\u003eHARDWARE KIT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569681764575,"sku":"97144","price":1086.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/97144.jpg?v=1784060465"},{"product_id":"2000-2003-1st-gen-tundra-lower-uniball-conversion-heim-steering","title":"2000-2003 1st Gen Tundra Lower Uniball Conversion Heim Steering","description":"\u003cp\u003eUpgrade your suspension with the Lower Uniball Conversion Kit, designed to replace the factory ball joints with a stronger, more durable solution. CNC machined from AISI 1018 billet steel, this kit improves steering geometry and reduces bump steer for enhanced handling and performance. Featuring built-in locating pins and a registering center ring, the design locks into the spindle, reducing shear loads on the mounting hardware for increased reliability during demanding off-road use. This 100% bolt-on and fully rebuildable conversion is coated with black Cerakote to resist corrosion and includes pre-welded double shear tie rod tabs with a 2.125\" inner spread. While compatible with both stock Toyota lower control arms (LCA) and TOTAL CHAOS long travel kits, it must be paired with the TC Heim Steering Upgrade (PT# 96099, sold separately) for optimal performance. Designed for vehicles with 2\"-3\" of suspension lift, this kit provides enhanced strength and geometry while retaining adjustability.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCNC machined AISI 1018 billet steel construction for exceptional strength and durability.\u003c\/li\u003e\n\u003cli\u003eBuilt-in locating pins and registering center ring reduce shear load on mounting hardware.\u003c\/li\u003e\n\u003cli\u003eImproves steering geometry and reduces bump steer for better handling.\u003c\/li\u003e\n\u003cli\u003e100% bolt-on design with fully rebuildable components.\u003c\/li\u003e\n\u003cli\u003ePre-welded double shear tie rod tabs with 2.125\" inner spacing.\u003c\/li\u003e\n\u003cli\u003eIncludes tapered adapters for use with stock Toyota LCAs or TC long travel kits.\u003c\/li\u003e\n\u003cli\u003eBlack Cerakote coating for maximum corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eCompatible with the TC Heim Steering Upgrade (PT# 96099, sold separately).\u003c\/li\u003e\n\u003cli\u003eDesigned for vehicles with 2\"-3\" suspension lift; installation outside this range may cause alignment issues.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569681830111,"sku":"96140-H","price":1052.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/96140-H_627eedc6-62c2-4768-a4ab-90e0678c400c.jpg?v=1784060467"},{"product_id":"2000-2003-1st-gen-tundra-lower-uniball-conversion-oe-tie-rod","title":"2000-2003 1st Gen Tundra Lower Uniball Conversion OE Tie Rod","description":"\u003cp\u003eUpgrade your suspension with the Lower Uniball Conversion with OE Tie Rod Steering, designed to replace the factory ball joint with enhanced strength, durability, and improved steering geometry. Engineered for easy bolt-on installation, this conversion kit reduces bump steer, provides better handling, and maximizes suspension performance. Built with precision CNC machined AISI 1018 billet steel, the conversion is 100% rebuildable and designed to withstand rigorous off-road and on-road use. Enhanced Strength \u0026amp; Durability: Upgrades factory ball joint to uniball, reducing bump steer and improving geometry.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced Strength \u0026amp; Durability: Upgrades factory ball joint to uniball, reducing bump steer and improving geometry.\u003c\/li\u003e\n\u003cli\u003ePrecision Engineering: CNC machined AISI 1018 billet steel with built-in locating pins and registering center ring for secure fitment.\u003c\/li\u003e\n\u003cli\u003eBolt-On Design: Compatible with stock Toyota lower control arms or TC long travel kits.\u003c\/li\u003e\n\u003cli\u003eCorrosion Resistance: Black Cerakote coating ensures long-lasting protection.\u003c\/li\u003e\n\u003cli\u003eCustomizable Setup: Reuses factory outer tie rod ends for seamless integration.\u003c\/li\u003e\n\u003cli\u003eFully Rebuildable: Designed for long-term performance and maintenance.\u003c\/li\u003e\n\u003cli\u003eDoes Not Fit: 2004-2006 Tundras.\u003c\/li\u003e\n\u003cli\u003e2003 Tundras: Require the following OEM Toyota outer tie rods: Left: 45047-39295\u003c\/li\u003e\n\u003cli\u003eRight: 45046-39465\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569681862879,"sku":"97140-TUN","price":1015.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/97140-TUN.jpg?v=1784060469"},{"product_id":"2000-2006-1st-gen-tundra-shock-hoop-bypass-package-mid-travel","title":"2000-2006 1st Gen Tundra Shock Hoop Bypass Package Mid Travel","description":"\u003cp\u003eMaximize your vehicle’s damping control and tunability with the TOTAL CHAOS Dual Shock Hoops and KING 2.5\" Front Bypass Shocks. Designed for vehicles equipped with TOTAL CHAOS lower control arms with dual shock tabs, this setup allows for the installation of secondary 2.5\" bypass shocks. The 4130 pre-bent chromoly shock hoops reinforce the factory coil bucket while maintaining a low-profile design, ensuring no interference with the inner fender well. The flush-mount top plate accommodates shocks with bolts or stud mounts, eliminating the need for trimming the inner fender well for installation. Tacked-in-place upper shock tabs make positioning the secondary shock easy, but welding is required for final installation.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced Damping: Provides custom tunability and damping control with secondary shocks.\u003c\/li\u003e\n\u003cli\u003eDurable Construction: 4130 pre-bent chromoly shock hoops for strength and longevity.\u003c\/li\u003e\n\u003cli\u003eReinforced Design: Reinforces factory coil bucket with a low-profile design to avoid contact with inner fender well.\u003c\/li\u003e\n\u003cli\u003eFlush Mount Top Plate: Accommodates both bolt and stud-mounted shocks without trimming.\u003c\/li\u003e\n\u003cli\u003eEasy Installation: Upper shock tabs are tacked in place for setup; welding is required.\u003c\/li\u003e\n\u003cli\u003eComplete Kit: Includes Grade 8 hardware for secure mounting.\u003c\/li\u003e\n\u003cli\u003e(1) TOTAL CHAOS Dual Shock Hoops (PN: 97702)\u003c\/li\u003e\n\u003cli\u003e(1) Pair of KING 2.5\" Front Bypass Shocks (PN: KNG-TC1151-25)\u003c\/li\u003e\n\u003cli\u003eGrade 8 Hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569681928415,"sku":"97702-25-MT","price":2221.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/97702-25-MT.jpg?v=1784060471"},{"product_id":"2004-2006-1st-gen-tundra-expedition-series-stock-length-lower-control-arms","title":"2004-2006 1st Gen Tundra Expedition Series Stock Length Lower Control Arms","description":"\u003cp\u003eComplete stock replacement lower control arm upgrade for the 2004-2006 Tundra. For model years 2000-2003 use part number 97555-E.\u003cbr\u003e\u003cbr\u003eFully boxed mild steel construction features internal gussets for added strength.\u003cbr\u003e\u003cbr\u003eLower ball joint location moved slightly forward to increase caster for alignment.\u003cbr\u003e\u003cbr\u003eLower shock tabs are designed to work with all brand aftermarket coil over shocks.\u003cbr\u003e\u003cbr\u003eLower control arms are pre-tabbed for dual 2.5\" diameter shock capability.\u003cbr\u003e\u003cbr\u003eCompatible with a factory Toyota ball joints or can be installed with the TC lower uniball conversion.\u003cbr\u003e\u003cbr\u003eUrethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel.\u003cbr\u003e\u003cbr\u003eZerk fittings allow for easy maintenance on the lower pivot bushings.\u003cbr\u003e\u003cbr\u003eThree stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003eHand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003eNOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.\u003c\/p\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569681961183,"sku":"97554-E","price":2192.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/97554-E.jpg?v=1784060473"},{"product_id":"2000-2003-1st-gen-tundra-expedition-series-stock-length-lower-control-arms","title":"2000-2003 1st Gen Tundra Expedition Series Stock Length Lower Control Arms","description":"\u003cp\u003eUpgrade your suspension with the \u003cstrong\u003eStock Replacement Lower Control Arm Upgrade\u003c\/strong\u003e, designed for enhanced durability, improved alignment, and compatibility with aftermarket shocks. Constructed from fully boxed mild steel with internal gussets, these lower control arms deliver exceptional strength and reliability for off-road and daily driving performance. Featuring dual shock tabs and forward ball joint placement for increased caster, this upgrade ensures better alignment and a tighter steering feel, making it a must-have for your suspension system.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction\u003c\/strong\u003e: Fully boxed mild steel with internal gussets for added strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Caster Alignment\u003c\/strong\u003e: Ball joint location moved slightly forward to enhance alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Shock Compatibility\u003c\/strong\u003e: Pre-tabbed for dual 2.5\" diameter shocks; works with all aftermarket coil over shocks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUrethane Pivot Bushings\u003c\/strong\u003e: Reduces deflection compared to rubber bushings, providing a tighter steering feel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Maintenance\u003c\/strong\u003e: Zerk fittings allow for convenient lubrication of lower pivot bushings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Finish\u003c\/strong\u003e: Three-stage powder coat with a durable clear coat for long-lasting protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable Setup\u003c\/strong\u003e: Compatible with factory Toyota ball joints or TC lower uniball conversion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdditional Information:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Compatible\u003c\/strong\u003e: With 4\"-7\" spindle\/drop bracket lifts.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHandcrafted in the U.S.A.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKit Contents:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Fully Boxed Mild Steel Lower Control Arms with Dual Shock Tabs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":50569681993951,"sku":"97555-E","price":2192.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/97555-E.jpg?v=1784060475"},{"product_id":"2000-2006-tundra-1-5-lift-front-springs-ascx","title":"2000-2006 Tundra 1.5\" Lift Front Springs [ASC5121]","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned and manufactured in the USA\u003c\/li\u003e\n\u003cli\u003eHigh-Quality USA steel\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for its application\u003c\/li\u003e\n\u003cli\u003eHard terrain-resistant gloss black powdercoat\u003c\/li\u003e\n\u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003cli\u003e1.5\" lift stock weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e00-06 1st Gen Toyota Tundra\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"American Spring Company","offers":[{"title":"Default Title","offer_id":50610103877855,"sku":"ASC5121","price":249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/Untitleddesign_61_de6d0f66-adf6-4dae-bc6a-ea5f6363b40b.png?v=1785265735"},{"product_id":"2000-2006-tundra-2-5-lift-front-springs-ascxx","title":"2000-2006 Tundra 2.5\" Lift Front Springs [ASC5131]","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned and manufactured in the USA\u003c\/li\u003e\n\u003cli\u003eHigh-Quality USA steel\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for its application\u003c\/li\u003e\n\u003cli\u003eHard terrain-resistant gloss black powdercoat\u003c\/li\u003e\n\u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003cli\u003e2.5\" lift stock weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e00-06 1st Gen Toyota Tundra\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"American Spring Company","offers":[{"title":"Default Title","offer_id":50610103943391,"sku":"ASC5131","price":249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/Untitleddesign_61_0ac0a17d-0fea-47a1-a409-12a079daba0d.png?v=1785265738"},{"product_id":"2000-2006-tundra-2-5-lift-front-springs-plus-weight-ascxxx","title":"2000-2006 Tundra 2.5\" Lift Front Springs (Plus Weight) [ASC3121]","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned and manufactured in the USA\u003c\/li\u003e\n\u003cli\u003eHigh-Quality USA steel\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for its application\u003c\/li\u003e\n\u003cli\u003eHard terrain-resistant gloss black powdercoat\u003c\/li\u003e\n\u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003cli\u003e2.5\" lift w\/ 200+ lbs front weight - access cab\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e00-06 1st Gen Toyota Tundra\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"American Spring Company","offers":[{"title":"Default Title","offer_id":50610103976159,"sku":"ASC3121","price":249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/Untitleddesign_61_a8b15b5d-1589-4123-bd1b-0a2e3d050dcf.png?v=1785265739"},{"product_id":"2000-2006-tundra-2-5-lift-front-springs-plus-weight-asc3131","title":"2000-2006 Tundra 2.5\" Lift Front Springs (Plus Weight) [ASC3131]","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned and manufactured in the USA\u003c\/li\u003e\n\u003cli\u003eHigh-Quality USA steel\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for its application\u003c\/li\u003e\n\u003cli\u003eHard terrain-resistant gloss black powdercoat\u003c\/li\u003e\n\u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003cli\u003e2.5\" lift w\/ 200+ lbs front weight - double cab\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e00-06 1st Gen Toyota Tundra\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"American Spring Company","offers":[{"title":"Default Title","offer_id":50610104008927,"sku":"ASC3131","price":249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/Untitleddesign_61_22193c1c-06c3-4806-9e2c-33e64816d208.png?v=1785265741"},{"product_id":"1st-2nd-gen-tundra-fox-performance-series-6-6-smooth-body-ifp-front-shock-0-2-lift","title":"1st\/2nd Gen Tundra Fox Performance Series 6.6\" Smooth Body IFP Front Shock | 0-2\" Lift","description":"\u003ctable border=\"1\" style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth width=\"100\" align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth width=\"125\" align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth width=\"150\" align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth width=\"80\" align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003e1794 Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007-2013\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007-2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eNightshade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003ePlatinum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eSR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007-2011,2014-2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eSR5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eTrail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2017,2019-2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eTRD Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Fox","offers":[{"title":"Default Title","offer_id":50763448320223,"sku":"985-62-003","price":314.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/2007-2021TundraFoxPerformanceSeries2.0SnapRingCoil-OverIFPShock_4938b6a6-c363-4ba6-8716-d6225b1520d3.png?v=1785781315"},{"product_id":"1st-gen-tundra-fox-2-0-performance-series-4-625-ifp-coilover-shock-0-2-lift","title":"1st Gen Tundra Fox 2.0 Performance Series 4.625\" IFP Coilover Shock | 0-2\" Lift","description":"\u003ctable border=\"1\" style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth width=\"100\" align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth width=\"125\" align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth width=\"150\" align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth width=\"80\" align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000-2006\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000-2006\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000-2006\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eSR5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Fox","offers":[{"title":"Default Title","offer_id":50763449925855,"sku":"985-02-005","price":629.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/25_4Runner_24_LandCruiser_GX550FoxPerformanceSeries2.5Coil-OverIFPShock_b1c9b6c6-ffc1-4aa7-9968-2f42d6994916.png?v=1785781347"},{"product_id":"1st-gen-tundra-fox-2-0-performance-series-8-1-smooth-body-ifp-rear-shock-0-1-lift","title":"1st Gen Tundra Fox 2.0 Performance Series 8.1\" Smooth Body IFP Rear Shock | 0-1\" Lift","description":"\u003ctable border=\"1\" style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth width=\"100\" align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth width=\"125\" align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth width=\"150\" align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth width=\"80\" align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000-2006\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000-2006\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000-2006\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eSR5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Fox","offers":[{"title":"Default Title","offer_id":50763450417375,"sku":"980-24-674","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/2005-2015TacomaFoxPerformanceSeries2.0SmoothBodyIFPShock_d7d65353-bbd3-4bdc-9b3f-45b2079a1bc8.png?v=1785781350"},{"product_id":"1st-gen-tundra-fox-2-5-factory-series-5-45-remote-res-coilover-shock-w-dsc-adj","title":"1st Gen Tundra Fox 2.5 Factory Series 5.45\" Remote Res. Coilover Shock w\/ DSC Adj.","description":"\u003ctable border=\"1\" style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth width=\"100\" align=\"left\"\u003eYear\u003c\/th\u003e\n\u003cth width=\"125\" align=\"left\"\u003eMake\u003c\/th\u003e\n\u003cth width=\"150\" align=\"left\"\u003eModel\u003c\/th\u003e\n\u003cth width=\"80\" align=\"left\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000-2006\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000-2006\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000-2006\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd\u003eSR5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Fox","offers":[{"title":"Default Title","offer_id":50763465195743,"sku":"880-06-420","price":2519.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0812\/7289\/7759\/files\/1995-2004TacomaFoxFactoryRaceSeries2.5Coil-OverReservoirShock_Pair_-Adjustable_b330847a-acd9-496c-b03c-575dcc707949.png?v=1785781417"}],"url":"https:\/\/yotamafia.com\/collections\/1st-gen-tundra-suspension.oembed?page=2","provider":"Yota Mafia","version":"1.0","type":"link"}